Overview
The CASE Construction Equipment Case 330 is a articulated dump truck listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 285 hp, operating weight of 68,100 lb, working depth of 23.80 ft, capacity of 22.1 yd3, travel speed of 27.7 mph and fuel capacity of 86.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 330 against similar articulated dump truck models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
68,100
lb
Net Power
285
hp
Gross Power
315
hp
Rated Payload
59,525
lb
Full Specifications
83 specs
Dimensions
Bucket Digging Force - Iso
40,200 lb / 18,234 kg
Bucket Digging Force - Sae
35,300 lb / 16,012 kg
Capacity - Heaped
21.60 yd³ / 16.51 m³
Capacity - Struck
17 yd³ / 13.00 m³
Counterweight Clearance
3.70 ft / 1.13 m
Dump Angle
67 deg
Dump Ground Clearance
2.89 ft / 0.88 m
Dump Height
21.07 ft / 6.42 m
Ground Clearance
1.60 ft / 0.49 m
Handrail Height
10.10 ft / 3.08 m
Maximum Reach At Ground Level
35.10 ft / 10.70 m
Overall Height
11.96 ft / 3.65 m
Overall Length
32.15 ft / 9.80 m
Overall Width
9.63 ft / 2.94 m
Rated Payload
59,525 lb / 27,000 kg
Shipping Height - Top Of Cab
10.10 ft / 3.08 m
Shipping Length
34.21 ft / 10.43 m
Tail Swing Radius
10.30 ft / 3.14 m
Track Gauge - Narrow Undercarriage
7.80 ft / 2.38 m
Track Length To Center Of Rollers
13.10 ft / 3.99 m
Transport Width - 600 Mm (24") Shoes- Narrow Undercarriage
9.81 ft / 2.99 m
Transport Width - 600 Mm (24) Shoes
10.50 ft / 3.20 m
Transport Width - 800 Mm (31) Shoes
11.10 ft / 3.38 m
Wheelbase
19.66 ft / 5.99 m
Engine
Alternator Supplied Amperage
70 A
Bore
4 in / 102 mm
Def Tank
10.80 gal / 40.9 L
Displacement
428 cu in / 7.0 L
Engine Make
2347
Engine Model
QSM11
Engine Oil Capacity
9 gal / 34.1 L
Engine Rpm - Operation
1,750
Engine Rpm - Travel
1,750
Front Axle - Empty
22,619 lb / 10,260 kg
Fuel Capacity
86 gal / 325.5 L
Fuel Tank Capacity
125.20 gal / 473.9 L
Gross Power
315 hp / 234.9 kW
Gross Power - Iso 14396/Sae J1995
275 hp / 205.1 kW
Hydraulic System Fluid Capacity
92.50 gal / 350.2 L
Hydraulic Tank
38.80 gal / 146.9 L
Max Speed
27.70 mph / 44.6 km/h
Max Torque
1,180 lb-ft / 1,600 Nm
Net Flywheel Power
272 hp / 202.8 kW
Net Power
300 hp / 223.7 kW
Net Power - Iso 9249
273 hp / 203.6 kW
Net Power - Sae J1349
272 hp / 202.8 kW
Number of Cylinders
6
Number of Forward Gears
6
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
68,100 lb / 30,890 kg
Power Measured @
1,900 rpm
Rear Axle - Empty
21,826 lb / 9,900 kg
Stroke
5 in / 127 mm
Swing Drive
2.60 deg
Torque Measured @
1,000 rpm
Total Empty
44,445 lb / 20,160 kg
Total Loaded
103,970 lb / 47,160 kg
Transmission Fluid Capacity
10 gal / 37.9 L
Hydraulics
Engine Oil
6.60 gal / 25.0 L
Lower Time
16 sec
Main System - Maximum Flow - Implement
148 gal/min / 560.2 L/min
Maximum Pressure - Equipment - Heavy Lift Mode
5,510 psi / 379.9 bar
Maximum Pressure - Equipment - Normal
5,075 psi / 349.9 bar
Maximum Pressure - Swing
4,320 psi / 297.9 bar
Maximum Pressure - Travel
5,075 psi / 349.9 bar
Raise Time
14 sec
Other
Capacity - Heaped
22.10 yd³ / 16.90 m³
Cooling System
6.60 gal / 25.0 L
Final Drive - Each
1.5
Hydraulic System - Including Tank
81.90 gal / 310.0 L
Maximum Cutting Height
32.90 ft / 10.03 m
Maximum Depth Cut For 2440 Mm (8 Ft) Level Bottom
23.30 ft / 7.10 m
Maximum Digging Depth
23.80 ft / 7.25 m
Maximum Loading Height
22.80 ft / 6.95 m
Maximum Vertical Wall Digging Depth
19.80 ft / 6.04 m
Minimum Loading Height
7.60 ft / 2.32 m
Net Power
285 hp / 212.5 kW
Operating Weight - 600 Mm (24) Triple Grouser Shoes
66,000 lb / 29,937 kg
Operating Weight - 800 Mm (31) Triple Grouser Shoes
68,100 lb / 30,890 kg
Stick Digging Force - Iso
28,300 lb / 12,837 kg
Stick Digging Force - Sae
27,700 lb / 12,565 kg
Undercarriage
Track Gauge
8.50 ft / 2.59 m
Related Machines
Frequently Asked Questions
What is the operating weight of the CASE Construction Equipment Case 330? +
The CASE Construction Equipment Case 330 has an operating weight of 68,100 lb (30,890 kg). This places it in a class suited for articulated dump truck applications where ground pressure and transport weight are key considerations.
How powerful is the CASE Construction Equipment Case 330 engine? +
The CASE Construction Equipment Case 330 produces 315 hp (234.9 kW) of engine power. This output is typical for its weight class and designed to handle demanding Articulated Dump Truck work cycles efficiently.
What is the maximum digging depth of the CASE Construction Equipment Case 330? +
The CASE Construction Equipment Case 330 has a maximum digging depth of 23.80 ft (7.25 m). This makes it suitable for trenching, foundation work, and other excavation tasks requiring vertical reach.
How does the CASE Construction Equipment Case 330 compare to similar Articulated Dump Truck models? +
You can compare the CASE Construction Equipment Case 330 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.