CASE 580 Super M+ Series III Loader Backhoe Specs
Overview
The CASE Construction Equipment Case 580 Super M+ Series III Loader Backhoe is a backhoe loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 91 hp, capacity of 1.0 yd³, fuel capacity of 31.4 gal and hydraulic capacity of 29.5 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 580 Super M+ Series III Loader Backhoe against similar backhoe loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
91.20
hp
Gross Power
96.60
hp
Dig Depth - Std
14.42
ft
Bucket Capacity
1.03
yd3
Full Specifications
56 specs
Dimensions
Bucket Breakout Force
9,164 lb / 4,157 kg
Bucket Dig Force - Ext
12,821 lb / 5,816 kg
Bucket Dig Force - Std
12,821 lb / 5,816 kg
Bucket Width
82 in / 2,083 mm
Clearance At Max Dump Height
8.83 ft / 2.69 m
Dig Depth
5.90 ft / 1.80 m
Dig Depth - Ext
18.25 ft / 5.56 m
Dig Depth - Std
14.42 ft / 4.40 m
Ground Clearance
1.22 ft / 0.37 m
Height To Top Of Suspended Cab
8.83 ft / 2.69 m
Lift Capacity At Full Height
6,182 in / 157,023 mm
Load At Max Lift - Ext
1,350 lb / 612 kg
Load At Max Lift - Std
2,750 lb / 1,247 kg
Load Height - Ext
13.25 ft / 4.04 m
Load Height - Std
11.17 ft / 3.40 m
Reach At Load Height - Ext
11.50 ft / 3.51 m
Reach At Load Height - Std
8.75 ft / 2.67 m
Reach At Max Dump Height
2.50 ft / 0.76 m
Reach From Swivel - Ext
21.83 ft / 6.65 m
Reach From Swivel - Std
18.08 ft / 5.51 m
Transport Height
10.80 ft / 3.29 m
Transport Length
22.83 ft / 6.96 m
Transport Width
7.17 ft / 2.19 m
Wheelbase
7.04 ft / 2.15 m
Engine
11Lx16.1/12x16.5
2
Alternator Supplied Amperage
90 A
Bucket Capacity
1.03 yd³ / 0.79 m³
Cooling System Fluid Capacity
4.80 gal / 18.2 L
Displacement
272 cu in / 4.5 L
Engine Make
2239
Engine Model
Family IV 445TA/E3, Tier III certified
Front Axle Fluid Capacity
1.50 gal / 5.7 L
Fuel Capacity
31.40 gal / 118.9 L
Gross Power
97 hp / 72.0 kW
Hydraulic System Fluid Capacity
29.50 gal / 111.7 L
Max Speed - Forward
26.10 mph / 42.0 km/h
Max Speed Reverse
31.60 mph / 50.9 km/h
Max Weight
17,545 lb / 7,958 kg
Net Max Torque
329 lb-ft / 446 Nm
Net Power
91 hp / 68.0 kW
Net Torque Rise
45 lb-ft / 61 Nm
Number of Cylinders
4
Number of Forward Gears
4
Number of Reverse Gears
4
Oil System Fluid Capacity
3.60 gal / 13.6 L
Operating Voltage
12 V
Operating Weight 2wd
14,285 lb / 6,480 kg
Operational
Operating Weight 2wd
Power Measured @
2,200 rpm
Rear Axle Fluid Capacity
3.60 gal / 13.6 L
Relief Valve Pressure
3,050 psi / 210.3 bar
Torque Measured @
1,400 rpm
Transmission Fluid Capacity
5.20 gal / 19.7 L
Transmission Type
4-speed synchromesh with hydraulically actuated clutches
Turning Radius
11 ft / 3.35 m
Hydraulics
Pump Flow Capacity
38.10 gal/min / 144.2 L/min
Related Machines
Frequently Asked Questions
How powerful is the CASE Construction Equipment Case 580 Super M+ Series III Loader Backhoe engine? +
The CASE Construction Equipment Case 580 Super M+ Series III Loader Backhoe produces 97 hp (72.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Backhoe Loader work cycles efficiently.
How does the CASE Construction Equipment Case 580 Super M+ Series III Loader Backhoe compare to similar Backhoe Loader models? +
You can compare the CASE Construction Equipment Case 580 Super M+ Series III Loader Backhoe side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.