Overview
The CASE Construction Equipment Case 580 Super N Loader Backhoe is a backhoe loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 95 hp, capacity of 1.0 yd³, travel speed of 23.6 mph, fuel capacity of 42.1 gal and hydraulic capacity of 31.5 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 580 Super N Loader Backhoe against similar backhoe loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
95
hp
Gross Power
97
hp
Dig Depth - Std
14.47
ft
Bucket Capacity
1.01
yd3
Full Specifications
74 specs
Dimensions
Bucket Width
82 in / 2,083 mm
Clearance At Max Dump Height
8.83 ft / 2.69 m
Dig Depth
172.05 ft / 52.44 m
Dig Depth - Ext
17.95 ft / 5.47 m
Dig Depth - Std
14.47 ft / 4.41 m
Ground Clearance
1 ft / 0.30 m
Height to Top of Cab
105.52 in / 2,680 mm
Lift Capacity At Full Height
7,043.77 in / 178,912 mm
Load Height - Ext
14.38 ft / 4.38 m
Load Height - Std
12.05 ft / 3.67 m
Reach At Load Height - Ext
7.22 ft / 2.20 m
Reach At Load Height - Std
4.63 ft / 1.41 m
Reach At Max Dump Height
2.63 ft / 0.80 m
Reach From Swivel - Ext
21.59 ft / 6.58 m
Reach From Swivel - Std
18.21 ft / 5.55 m
Transport Height
10.80 ft / 3.29 m
Transport Length
23.43 ft / 7.14 m
Transport Width
7.12 ft / 2.17 m
Wheelbase
7.06 ft / 2.15 m
Engine
11L x 16 / 12 x 16.5
2
Alternator
160 A
Alternator Supplied Amperage
120 A
Arm Breakout Force, Sae
11,151 lb / 5,058 kg
Backhoe Flow- Gallons
41.30 gal/min / 156.3 L/min
Boom Lift - Maximum Reach - Retracted Dipper
2,837.40 ft / 864.84 m
Bore
3.90 in / 99 mm
Bucket Capacity
1.01 yd³ / 0.77 m³
Bucket Digging Force (Iso)
135 lb / 61 kg
Cooling System Fluid Capacity
4.80 gal / 18.2 L
Diesel Exhaust Fluid (Def) Tank
3.60 gal / 13.6 L
Dipper Stick Digging Force
8,657 lb / 3,927 kg
Dipper Stick Lift Capacity
5,823 lb / 2,641 kg
Displacement
208 cu in / 3.4 L
Emissions Certification
Tier 4 Final
Engine Make
2239
Engine Model
FPT F5BFL413B
Engine Oil With Filter
2.20 gal / 8.3 L
Fan
9
Front
12L x 16.5 (4WD)
Front Axle
470 lb / 213 kg
Front Axle Fluid Capacity
2.10 gal / 7.9 L
Fuel Capacity
42.10 gal / 159.4 L
Fuel Tank
34.90 gal / 132.1 L
Gross Power
97 hp / 72.3 kW
Horsepower - Gross
97 hp / 72.0 kW
Horsepower -Net
95 hp / 71.1 kW
Hydraulic System Fluid Capacity
31.50 gal / 119.2 L
Loader Bucket Heaped Capacity
1.10 yd³ / 0.84 m³
Max Speed
23.60 mph / 38.0 km/h
Max Speed - Forward
24 mph / 38.6 km/h
Max Speed Reverse
28.80 mph / 46.3 km/h
Max Torque
334 lb-ft / 453 Nm
Net Max Torque
328 lb-ft / 445 Nm
Net Power
95 hp / 70.8 kW
Net Torque
334 lb-ft / 453 Nm
Net Torque Rise
45 lb-ft / 61 Nm
Number of Cylinders
4
Number of Forward Gears
4
Number of Reverse Gears
4
Oil System Fluid Capacity
3.60 gal / 13.6 L
Operating Voltage
12 V
Operating Weight 2wd
16,239 lb / 7,366 kg
Operating Weight 4wd
17,226 lb / 7,814 kg
Power Measured @
2,200 rpm
Rear
17.5 L24 (4WD)
Rear Axle
4 lb / 2 kg
Rear Axle Fluid Capacity
3.60 gal / 13.6 L
Relief Valve Pressure
3,450 psi / 237.9 bar
Stroke
4.40 in / 112 mm
Torque Measured @
1,400 rpm
Transmission Fluid Capacity
5.30 gal / 20.1 L
Turning Radius
11 ft / 3.35 m
Hydraulics
Pump Flow Capacity
40 gal/min / 151.4 L/min
Other
Cooling System
4.80 gal / 18.2 L
Related Machines
Frequently Asked Questions
How powerful is the CASE Construction Equipment Case 580 Super N Loader Backhoe engine? +
The CASE Construction Equipment Case 580 Super N Loader Backhoe produces 97 hp (72.3 kW) of engine power. This output is typical for its weight class and designed to handle demanding Backhoe Loader work cycles efficiently.
How does the CASE Construction Equipment Case 580 Super N Loader Backhoe compare to similar Backhoe Loader models? +
You can compare the CASE Construction Equipment Case 580 Super N Loader Backhoe side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.