Overview
The CASE Construction Equipment Case 586H is a forklift listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 68 hp, operating weight of 13,682 lb and hydraulic capacity of 18 gal/min. This model can be reviewed for lifting capacity, load handling, warehouse use, yard work, and material handling comparison. Use the full specifications table to compare the CASE Construction Equipment Case 586H against similar forklift models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
13,681.90
lb
Net Power
68
hp
Overall Length
16.20
ft
Overall Width
6.95
ft
Full Specifications
39 specs
Dimensions
Fuel Tank - Diesel
31 gal / 117.3 L
Ground Clearance
10.24 ft / 3.12 m
Lift Height- Largest Mast
264.18 in / 6,710 mm
Lift Height-Smallest Mast
4,570 in / 116,078 mm
Load Capacity
6,001 lb / 2,722 kg
Load Center
24 in / 610 mm
Mast Tip Forward
45 in / 1,143 mm
Mast Tip Rear
15 in / 381 mm
Max Fork Height
15 ft / 4.57 m
Overall Height - Mast Lowered
10.70 ft / 3.26 m
Overall Height, Rops Cab
104.14 in / 2,645 mm
Overall Length
16.20 ft / 4.94 m
Overall Width
6.95 ft / 2.12 m
Power Shuttle
1
Wheelbase
6.99 ft / 2.13 m
Engine
Alternator
120 A
Displacement
208 cu in / 3.4 L
Emission Tier Level
Tier 4
Engine Model
FPT F5HFL463D
Engine Oil W/ Filter Change
4.60 gal / 17.4 L
Engine Peak Torque
233 lb-ft / 316 Nm
Engine Speed - Rated Speed, Full Load
2,200
Front Axle
830 lb / 376 kg
Horsepower - Gross
74 hp / 55.2 kW
Horsepower -Net
68 hp / 50.7 kW
Net Power
68 hp / 50.7 kW
Number of Cylinders
4
Operating Weight
13,682 lb / 6,206 kg
Power
74 hp / 55.2 kW
Power Measured @
2,200 rpm
Pump Flow
18 gal/min / 68.1 L/min
Rear Axle
2 lb / 1 kg
Torque
233 lb-ft / 316 Nm
Torque Measured @
1,400 rpm
Transmission
4F-4R Power Shuttle Synchromesh Transmission manual gear shift fully synchronized
Travel Speeds - 1st
15 mph / 24.1 km/h
Turning Radius
10.78 ft / 3.29 m
Hydraulics
Pump Flow Capacity
18 gal/min / 68.1 L/min
Other
Cooling System
4.60 gal / 17.4 L
Related Machines
Frequently Asked Questions
What is the operating weight of the CASE Construction Equipment Case 586H? +
The CASE Construction Equipment Case 586H has an operating weight of 13,682 lb (6,206 kg). This places it in a class suited for forklift applications where ground pressure and transport weight are key considerations.
How powerful is the CASE Construction Equipment Case 586H engine? +
The CASE Construction Equipment Case 586H produces 68 hp (50.7 kW) of engine power. This output is typical for its weight class and designed to handle demanding Forklift work cycles efficiently.
How does the CASE Construction Equipment Case 586H compare to similar Forklift models? +
You can compare the CASE Construction Equipment Case 586H side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.