CASE 590 Super M Series III Loader Backhoe Specs
Overview
The CASE Construction Equipment Case 590 Super M Series III Loader Backhoe is a backhoe loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 109 hp, capacity of 1.3 yd³, fuel capacity of 42.1 gal and hydraulic capacity of 33.8 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 590 Super M Series III Loader Backhoe against similar backhoe loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
108.70
hp
Gross Power
110
hp
Dig Depth - Std
15.92
ft
Bucket Capacity
1.30
yd3
Full Specifications
54 specs
Dimensions
Bucket Breakout Force
10,729 lb / 4,867 kg
Bucket Dig Force - Ext
14,718 lb / 6,676 kg
Bucket Dig Force - Std
14,718 lb / 6,676 kg
Bucket Width
93 in / 2,362 mm
Clearance At Max Dump Height
9.03 ft / 2.75 m
Dig Depth
3.78 ft / 1.15 m
Dig Depth - Ext
19.92 ft / 6.07 m
Dig Depth - Std
15.92 ft / 4.85 m
Ground Clearance
1.24 ft / 0.38 m
Height To Top Of Suspended Cab
8.83 ft / 2.69 m
Lift Capacity At Full Height
7,325.97 in / 186,080 mm
Load At Max Lift - Ext
1,940 lb / 880 kg
Load At Max Lift - Std
3,309 lb / 1,501 kg
Load Height - Ext
13.75 ft / 4.19 m
Load Height - Std
11.42 ft / 3.48 m
Reach At Load Height - Ext
12.77 ft / 3.89 m
Reach At Load Height - Std
9.52 ft / 2.90 m
Reach At Max Dump Height
2.30 ft / 0.70 m
Reach From Swivel - Ext
23.59 ft / 7.19 m
Reach From Swivel - Std
19.66 ft / 5.99 m
Transport Height
11.62 ft / 3.54 m
Transport Length
23.59 ft / 7.19 m
Transport Width
7.75 ft / 2.36 m
Wheelbase
7.06 ft / 2.15 m
Engine
14.5/75x16.1 10ply / 14x17.5 10 ply
2
Alternator Supplied Amperage
90 A
Bucket Capacity
1.30 yd³ / 0.99 m³
Cooling System Fluid Capacity
4.80 gal / 18.2 L
Displacement
275 cu in / 4.5 L
Engine Make
2239
Engine Model
Family IV 445TA/E3 diesel, Tier III certified
Front Axle Fluid Capacity
1.80 gal / 6.8 L
Fuel Capacity
42.10 gal / 159.4 L
Gross Power
110 hp / 82.0 kW
Hydraulic System Fluid Capacity
33.80 gal / 127.9 L
Max Speed - Forward
25.60 mph / 41.2 km/h
Max Speed Reverse
30.70 mph / 49.4 km/h
Max Weight
19,579 lb / 8,881 kg
Net Max Torque
372 lb-ft / 504 Nm
Net Power
109 hp / 81.1 kW
Net Torque Rise
45 lb-ft / 61 Nm
Number of Cylinders
4
Number of Forward Gears
4
Number of Reverse Gears
4
Oil System Fluid Capacity
3.60 gal / 13.6 L
Operating Voltage
12 V
Operating Weight 4wd
15,269 lb / 6,926 kg
Power Measured @
2,200 rpm
Rear Axle Fluid Capacity
5 gal / 18.9 L
Relief Valve Pressure
3,000 psi / 206.8 bar
Torque Measured @
1,400 rpm
Transmission Fluid Capacity
5.20 gal / 19.7 L
Turning Radius
12.40 ft / 3.78 m
Hydraulics
Pump Flow Capacity
42.60 gal/min / 161.3 L/min
Related Machines
Frequently Asked Questions
How powerful is the CASE Construction Equipment Case 590 Super M Series III Loader Backhoe engine? +
The CASE Construction Equipment Case 590 Super M Series III Loader Backhoe produces 110 hp (82.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Backhoe Loader work cycles efficiently.
How does the CASE Construction Equipment Case 590 Super M Series III Loader Backhoe compare to similar Backhoe Loader models? +
You can compare the CASE Construction Equipment Case 590 Super M Series III Loader Backhoe side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.