Overview
The CASE Construction Equipment Case 845 DHP is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 90.0 gal and hydraulic capacity of 47.5 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 845 DHP against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
29,777
lb
Max Power
160
hp
Moldboard Width
12
ft
Overall Length
28
ft
Full Specifications
48 specs
Dimensions
Blade Base
8.42 in / 214 mm
Front Ground Clearance
2.04 ft / 0.62 m
Height To Top Of Isomount Cab
10.92 ft / 3.33 m
Overall Length
28 ft / 8.53 m
Rear Ground Clearance
1.25 ft / 0.38 m
Tandem Axle Wheelbase
5.17 ft / 1.58 m
Wheelbase
20.43 ft / 6.23 m
Width Over Tires
8.25 ft / 2.51 m
Engine
Alternator Supplied Amperage
80 A
Articulation Angle
25 deg
Circle Gearbox Fluid Capacity
0.80 gal / 3.0 L
Cooling System Fluid Capacity
10.50 gal / 39.7 L
Displacement
411 cu in / 6.7 L
Engine Make
2347
Engine Model
QSB 6.7, Tier III certified electronic controlled
Fuel Capacity
90 gal / 340.7 L
Hydraulic System Fluid Capacity
47.50 gal / 179.8 L
Max Depth Of Cut
28 ft / 8.53 m
Max Power
160 hp / 119.3 kW
Max Speed - Forward
26.60 mph / 42.8 km/h
Max Speed - Reverse
17.70 mph / 28.5 km/h
Moldboard Height
22 in / 559 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12 ft / 3.66 m
Net Power Gears 7-8
160 hp / 119.3 kW
Net Torque Gears 7-8
550 lb-ft / 746 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Oil System Fluid Capacity
4.30 gal / 16.3 L
Operating Voltage
24 V
Oscillation - Total
19 deg
Power Measured @
2,200 rpm
Pump Flow
50.50 gal/min / 191.2 L/min
Rear Diff/Final Drive Fluid Capacity
3.20 gal / 12.1 L
Side Shift Left
21 in / 533 mm
Side Shift Right
27 in / 686 mm
Std Operation Weight - Front Axle
8,155 lb / 3,699 kg
Std Operation Weight - Rear Axle
21,621 lb / 9,807 kg
Std Operation Weight - Total
29,777 lb / 13,507 kg
Tandem Case Fluid Capacity (Each)
7.60 gal / 28.8 L
Torque Measured @
1,500 rpm
Transmission Fluid Capacity
6.60 gal / 25.0 L
Turning Radius
23.80 ft / 7.25 m
Wheel Lean
17.50 deg
Hydraulics
Diameter
69 in / 1,753 mm
Max Lift Above Ground
17.50 in / 445 mm
Rotation
360 deg
Related Machines
Frequently Asked Questions
How does the CASE Construction Equipment Case 845 DHP compare to similar Motor Grader models? +
You can compare the CASE Construction Equipment Case 845 DHP side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.