Overview
The CASE Construction Equipment Case 865 DHP is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 90.1 gal and hydraulic capacity of 47.6 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 865 DHP against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
32,077
lb
Max Power
200
hp
Moldboard Width
13
ft
Overall Length
28
ft
Full Specifications
50 specs
Dimensions
Blade Base
8.41 in / 214 mm
Front Ground Clearance
2.05 ft / 0.62 m
Height To Top Of Isomount Cab
10.96 ft / 3.34 m
Overall Length
28 ft / 8.53 m
Rear Ground Clearance
1.25 ft / 0.38 m
Tandem Axle Wheelbase
5.23 ft / 1.59 m
Wheelbase
20.41 ft / 6.22 m
Width Over Tires
8.24 ft / 2.51 m
Engine
Alternator Supplied Amperage
80 A
Articulation Angle
25 deg
Blade Down Pressure
16,768 lb / 7,606 kg
Circle Gearbox Fluid Capacity
0.80 gal / 3.0 L
Cooling System Fluid Capacity
10.60 gal / 40.1 L
Displacement
360 cu in / 5.9 L
Engine Make
2347
Engine Model
QSB-5.9
Fuel Capacity
90.10 gal / 341.1 L
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
47.60 gal / 180.2 L
Max Depth Of Cut
28 ft / 8.53 m
Max Power
200 hp / 149.1 kW
Max Speed - Forward
26.60 mph / 42.8 km/h
Max Speed - Reverse
17.70 mph / 28.5 km/h
Moldboard Height
23.70 in / 602 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
13 ft / 3.96 m
Net Power Gears 7-8
200 hp / 149.1 kW
Net Torque Gears 7-8
601 lb-ft / 815 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Oil System Fluid Capacity
5.60 gal / 21.2 L
Operating Voltage
24 V
Oscillation - Total
19 deg
Power Measured @
2,200 rpm
Pump Flow
49 gal/min / 185.5 L/min
Rear Diff/Final Drive Fluid Capacity
3.20 gal / 12.1 L
Side Shift Left
21 in / 533 mm
Side Shift Right
27.10 in / 688 mm
Std Operation Weight - Front Axle
9,370 lb / 4,250 kg
Std Operation Weight - Rear Axle
22,707 lb / 10,300 kg
Std Operation Weight - Total
32,077 lb / 14,550 kg
Tandem Case Fluid Capacity (Each)
7.60 gal / 28.8 L
Torque Measured @
1,500 rpm
Transmission Fluid Capacity
7.20 gal / 27.3 L
Turning Radius
23.80 ft / 7.25 m
Wheel Lean
17.50 deg
Hydraulics
Diameter
69 in / 1,753 mm
Max Lift Above Ground
17.50 in / 445 mm
Rotation
360 deg
Related Machines
Frequently Asked Questions
How does the CASE Construction Equipment Case 865 DHP compare to similar Motor Grader models? +
You can compare the CASE Construction Equipment Case 865 DHP side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.