Overview
The CASE Construction Equipment Case 885 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 90.0 gal and hydraulic capacity of 50.2 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 885 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
37,950
lb
Max Power
205
hp
Moldboard Width
14
ft
Overall Length
28
ft
Full Specifications
50 specs
Dimensions
Blade Base
8.42 in / 214 mm
Front Ground Clearance
2.04 ft / 0.62 m
Height To Top Of Isomount Cab
10.92 ft / 3.33 m
Overall Length
28 ft / 8.53 m
Rear Ground Clearance
1.25 ft / 0.38 m
Tandem Axle Wheelbase
5.25 ft / 1.60 m
Wheelbase
20.43 ft / 6.23 m
Width Over Tires
8.67 ft / 2.64 m
Engine
Alternator Supplied Amperage
80 A
Articulation Angle
25 deg
Circle Gearbox Fluid Capacity
0.80 gal / 3.0 L
Cooling System Fluid Capacity
10.50 gal / 39.7 L
Displacement
411 cu in / 6.7 L
Engine Make
2347
Engine Model
QSB 6.7, Tier III certified electronic control
Fuel Capacity
90 gal / 340.7 L
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
50.20 gal / 190.0 L
Max Depth Of Cut
28 ft / 8.53 m
Max Power
205 hp / 152.9 kW
Max Speed - Forward
26.70 mph / 43.0 km/h
Max Speed - Reverse
19 mph / 30.6 km/h
Moldboard Height
23.60 in / 599 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
14 ft / 4.27 m
Net Power Gears 7-8
205 hp / 152.9 kW
Net Torque Gears 7-8
650 lb-ft / 881 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Oil System Fluid Capacity
4.70 gal / 17.8 L
Operating Voltage
24 V
Oscillation - Total
38 deg
Power Measured @
2,200 rpm
Pump Flow
37.90 gal/min / 143.5 L/min
Rear Diff/Final Drive Fluid Capacity
3.20 gal / 12.1 L
Relief Valve Pressure
6,092 psi / 420.0 bar
Side Shift Left
21 in / 533 mm
Side Shift Right
27.10 in / 688 mm
Std Operation Weight - Front Axle
11,227 lb / 5,092 kg
Std Operation Weight - Rear Axle
26,723 lb / 12,121 kg
Std Operation Weight - Total
37,950 lb / 17,214 kg
Tandem Case Fluid Capacity (Each)
6 gal / 22.7 L
Torque Measured @
1,500 rpm
Transmission Fluid Capacity
5 gal / 18.9 L
Turning Radius
23,914.10 ft / 7,289.02 m
Wheel Lean
17.50 deg
Hydraulics
Diameter
69 in / 1,753 mm
Max Lift Above Ground
17.50 in / 445 mm
Rotation
360 deg
Related Machines
Frequently Asked Questions
How does the CASE Construction Equipment Case 885 compare to similar Motor Grader models? +
You can compare the CASE Construction Equipment Case 885 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.