Overview
The CASE Construction Equipment Case 885B DHP is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 219 hp, fuel capacity of 90.0 gal and hydraulic capacity of 47.5 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 885B DHP against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
40,466
lb
Net Power
219
hp
Moldboard Width
14
ft
Overall Length
28
ft
Full Specifications
60 specs
Dimensions
Bank Angle
90 deg
Blade Base
8.41 in / 214 mm
Front Axle Clearance
22.84 ft / 6.96 m
Front Ground Clearance
2.05 ft / 0.62 m
Height To Top Of Isomount Cab
10.96 ft / 3.34 m
Overall Height With Cab
10.31 ft / 3.14 m
Overall Length
28 ft / 8.53 m
Rear Ground Clearance
1.25 ft / 0.38 m
Tandem Axle Wheelbase
5.33 ft / 1.62 m
Wheelbase
20.41 ft / 6.22 m
Width Over Tires
8.70 ft / 2.65 m
Engine
Alternator Supplied Amperage
90 A
Articulation Angle
25 deg
Blade Down Pressure
21,178 lb / 9,606 kg
Bore
4.10 in / 104 mm
Circle Gearbox Fluid Capacity
0.80 gal / 3.0 L
Cooling System Fluid Capacity
10.50 gal / 39.7 L
Displacement
409 cu in / 6.7 L
Emission Tier Level
Tier 3
Engine Make
2239
Engine Model
FPT 6.7L
Engine Type
4-stroke, turbocharged and air-to-air after cooled
Fuel Capacity
90 gal / 340.7 L
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
47.50 gal / 179.8 L
Max Depth Of Cut
28 ft / 8.53 m
Max Speed - Forward
26.70 mph / 43.0 km/h
Max Speed - Reverse
19 mph / 30.6 km/h
Moldboard Height
23.70 in / 602 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
14 ft / 4.27 m
Net Power
219 hp / 163.3 kW
Net Power Gears 7-8
214 hp / 159.6 kW
Net Torque Gears 7-8
726 lb-ft / 984 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Oil System Fluid Capacity
4.40 gal / 16.7 L
Operating Voltage
24 V
Oscillation - Total
15.30 deg
Power Measured @
2,200 rpm
Pump Flow
49 gal/min / 185.5 L/min
Rear Diff/Final Drive Fluid Capacity
10.50 gal / 39.7 L
Side Shift Left
21 in / 533 mm
Side Shift Right
27 in / 686 mm
Std Operation Weight - Front Axle
12,496 lb / 5,668 kg
Std Operation Weight - Rear Axle
27,970 lb / 12,687 kg
Std Operation Weight - Total
40,466 lb / 18,355 kg
Stroke
5.20 in / 132 mm
Tandem Case Fluid Capacity (Each)
15.90 gal / 60.2 L
Tire Size
20.50 in / 521 mm
Transmission Fluid Capacity
5.80 gal / 22.0 L
Turning Radius
24 ft / 7.32 m
Wheel Lean
20 deg
Hydraulics
Blade Pitch Operation Adjustment Fwd
42 in / 1,067 mm
Blade Pitch Operation Adjustment Rear
87 in / 2,210 mm
Diameter
69 in / 1,753 mm
Max Lift Above Ground
17.50 in / 445 mm
Rotation
360 deg
Speed Range
6
Related Machines
Frequently Asked Questions
How powerful is the CASE Construction Equipment Case 885B DHP engine? +
The CASE Construction Equipment Case 885B DHP produces 219 hp (163.3 kW) of engine power. This output is typical for its weight class and designed to handle demanding Motor Grader work cycles efficiently.
How does the CASE Construction Equipment Case 885B DHP compare to similar Motor Grader models? +
You can compare the CASE Construction Equipment Case 885B DHP side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.