Overview
The Caterpillar 140H is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 105.0 gal and hydraulic capacity of 20.8 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 140H against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
32,357
lb
Max Power
185
hp
Moldboard Width
12
ft
Overall Length
28.58
ft
Full Specifications
58 specs
Dimensions
Blade Base
8.40 in / 213 mm
Front Ground Clearance
1.96 ft / 0.60 m
Height To Top Of Isomount Cab
10.25 ft / 3.12 m
Overall Length
28.58 ft / 8.71 m
Rear Ground Clearance
1.13 ft / 0.34 m
Tandem Axle Wheelbase
5 ft / 1.52 m
Wheelbase
20.24 ft / 6.17 m
Width Over Tires
8.08 ft / 2.46 m
Engine
3176C DITA ATAAC VHP
1
Articulation Angle
20 deg
Blade Down Pressure
28,698 lb / 13,017 kg
Blade Pull At Max Weight
42,184 lb / 19,134 kg
Circle Gearbox Fluid Capacity
1.80 gal / 6.8 L
Cooling System Fluid Capacity
10 gal / 37.9 L
Displacement
629 cu in / 10.3 L
Engine Make
2236
Engine Model
3176C DITA ATAAC VHP
Fuel Capacity
105 gal / 397.5 L
Ground Clearance
2 ft / 0.61 m
Hydraulic System Fluid Capacity
20.80 gal / 78.7 L
Max Depth Of Cut
28.10 ft / 8.56 m
Max Operation Weight - Front Axle
16,733 lb / 7,590 kg
Max Operation Weight - Rear Axle
30,139 lb / 13,671 kg
Max Operation Weight - Total
46,872 lb / 21,261 kg
Max Power
185 hp / 138.0 kW
Max Speed - Forward
27.40 mph / 44.1 km/h
Max Speed - Reverse
21.60 mph / 34.8 km/h
Moldboard Height
24 in / 610 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12 ft / 3.66 m
Net Power Gear 1-2
165 hp / 123.0 kW
Net Power Gear 4-6
185 hp / 138.0 kW
Net Power Gear 5-6
185 hp / 138.0 kW
Net Power Gears 7-8
185 hp / 138.0 kW
Number Of Gears - Forward
8
Number Of Gears - Reverse
6
Number of Cylinders
6
Oscillation - Total
32 deg
Power Measured @
2,000 rpm
Pump Flow
54.40 gal/min / 205.9 L/min
Rear Diff/Final Drive Fluid Capacity
12.40 gal / 46.9 L
Relief Valve Pressure
3,500 psi / 241.3 bar
Side Shift Left
20.60 in / 523 mm
Side Shift Right
26 in / 660 mm
Std Operation Weight - Front Axle
9,123 lb / 4,138 kg
Std Operation Weight - Rear Axle
23,234 lb / 10,539 kg
Std Operation Weight - Total
32,357 lb / 14,677 kg
Tandem Case Fluid Capacity (Each)
16.90 gal / 64.0 L
Turning Radius
24.60 ft / 7.50 m
Wheel Lean
18 deg
Hydraulics
Blade Tip Angle - Front
40 deg
Blade Tip Angle - Rear
5 deg
Diameter
60.20 in / 1,529 mm
Max Lift Above Ground
18.90 in / 480 mm
Max Reach Outside Tires - Left
74.60 ft / 22.74 m
Max Reach Outside Tires - Right
77.90 ft / 23.74 m
Shift Left
27.40 in / 696 mm
Shift Right
28.70 in / 729 mm
Related Machines
Frequently Asked Questions
How does the Caterpillar 140H compare to similar Motor Grader models? +
You can compare the Caterpillar 140H side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.