Overview
The Caterpillar 140M2 AWD is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 109.9 gal and hydraulic capacity of 26.5 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 140M2 AWD against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
39,911
lb
Moldboard Width
12
ft
Overall Length
29.20
ft
Full Specifications
56 specs
Dimensions
Blade Base
8.39 in / 213 mm
Front Ground Clearance
1.97 ft / 0.60 m
Height To Top Of Isomount Cab
10.79 ft / 3.29 m
Overall Length
29.20 ft / 8.90 m
Rear Ground Clearance
1.13 ft / 0.34 m
Tandem Axle Wheelbase
5 ft / 1.52 m
Wheelbase
20.10 ft / 6.13 m
Width Over Tires
8.47 ft / 2.58 m
Engine
Articulation Angle
20 deg
Blade Down Pressure
22,884 lb / 10,380 kg
Blade Pull At Max Weight
20,044 lb / 9,092 kg
Circle Gearbox Fluid Capacity
1.90 gal / 7.2 L
Cooling System Fluid Capacity
14.80 gal / 56.0 L
Displacement
568 cu in / 9.3 L
Engine Make
2236
Engine Model
C9.3 ACERT VHP
Fuel Capacity
109.90 gal / 416.0 L
Ground Clearance
2 ft / 0.61 m
Hydraulic System Fluid Capacity
26.50 gal / 100.3 L
Max Depth Of Cut
28.20 ft / 8.60 m
Max Operation Weight - Front Axle
13,343 lb / 6,052 kg
Max Operation Weight - Rear Axle
36,444 lb / 16,531 kg
Max Operation Weight - Total
49,787 lb / 22,583 kg
Max Speed - Forward
29 mph / 46.7 km/h
Max Speed - Reverse
22.90 mph / 36.9 km/h
Moldboard Height
24 in / 610 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12 ft / 3.66 m
Net Power Gears 7-8
243 hp / 181.2 kW
Net Torque Gears 7-8
920 lb-ft / 1,247 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
6
Oil System Fluid Capacity
8 gal / 30.3 L
Oscillation - Total
32 deg
Power Measured @
2,100 rpm
Pump Flow
55.70 gal/min / 210.8 L/min
Relief Valve Pressure
3,500 psi / 241.3 bar
Side Shift Left
20.10 in / 511 mm
Side Shift Right
26 in / 660 mm
Std Operation Weight - Front Axle
9,684 lb / 4,393 kg
Std Operation Weight - Rear Axle
30,227 lb / 13,711 kg
Std Operation Weight - Total
39,911 lb / 18,103 kg
Tandem Case Fluid Capacity (Each)
17 gal / 64.4 L
Torque Measured @
2,100 rpm
Transmission Fluid Capacity
17.20 gal / 65.1 L
Turning Radius
25.50 ft / 7.77 m
Wheel Lean
18 deg
Hydraulics
Blade Tip Angle - Front
40 deg
Blade Tip Angle - Rear
5 deg
Diameter
60.30 in / 1,532 mm
Max Lift Above Ground
18.90 in / 480 mm
Max Reach Outside Tires - Left
70.50 ft / 21.49 m
Max Reach Outside Tires - Right
77.90 ft / 23.74 m
Rotation
360 deg
Shift Left
27.40 in / 696 mm
Shift Right
28.70 in / 729 mm
Related Machines
Frequently Asked Questions
How does the Caterpillar 140M2 AWD compare to similar Motor Grader models? +
You can compare the Caterpillar 140M2 AWD side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.