Overview
The Caterpillar 160H is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 104.9 gal and hydraulic capacity of 21.2 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 160H against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
35,891.30
lb
Max Power
200
hp
Moldboard Width
14
ft
Overall Length
33.13
ft
Full Specifications
57 specs
Dimensions
Height To Top Of Isomount Cab
11.02 ft / 3.36 m
Overall Length
33.13 ft / 10.10 m
Tandem Axle Wheelbase
5 ft / 1.52 m
Wheelbase
20.24 ft / 6.17 m
Width Over Tires
8.08 ft / 2.46 m
Engine
3176C ATAAC
1
Alternator Supplied Amperage
35 A
Articulation Angle
20 deg
Blade Down Pressure
30,442 lb / 13,808 kg
Blade Pull At Max Weight
44,249 lb / 20,071 kg
Circle Gearbox Fluid Capacity
1.90 gal / 7.2 L
Cooling System Fluid Capacity
10.10 gal / 38.2 L
Displacement
629 cu in / 10.3 L
Engine Make
2236
Engine Model
3176C ATAAC
Fuel Capacity
104.90 gal / 397.1 L
Hydraulic System Fluid Capacity
21.20 gal / 80.3 L
Max Depth Of Cut
30.40 ft / 9.27 m
Max Operation Weight - Front Axle
18,323 lb / 8,311 kg
Max Operation Weight - Rear Axle
33,003 lb / 14,970 kg
Max Operation Weight - Total
51,326 lb / 23,281 kg
Max Power
200 hp / 149.1 kW
Max Speed - Forward
27.10 mph / 43.6 km/h
Max Speed - Reverse
21.40 mph / 34.4 km/h
Moldboard Height
27.10 in / 688 mm
Moldboard Thickness
1 in / 25 mm
Moldboard Width
14 ft / 4.27 m
Net Power Gear 1-2
180 hp / 134.2 kW
Net Power Gear 4-6
200 hp / 149.1 kW
Net Power Gear 5-6
200 hp / 149.1 kW
Net Power Gears 7-8
200 hp / 149.1 kW
Net Torque Gears 7-8
841 lb-ft / 1,140 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
6
Number of Cylinders
6
Operating Voltage
24 V
Oscillation - Total
32 deg
Power Measured @
2,000 rpm
Pump Flow
68.70 gal/min / 260.1 L/min
Rear Diff/Final Drive Fluid Capacity
12.50 gal / 47.3 L
Relief Valve Pressure
3,503 psi / 241.5 bar
Side Shift Left
33.60 in / 853 mm
Side Shift Right
37.20 in / 945 mm
Std Operation Weight - Front Axle
10,117 lb / 4,589 kg
Std Operation Weight - Rear Axle
25,774 lb / 11,691 kg
Std Operation Weight - Total
35,891 lb / 16,280 kg
Tandem Case Fluid Capacity (Each)
17 gal / 64.4 L
Torque Measured @
1,000 rpm
Turning Radius
24.30 ft / 7.41 m
Wheel Lean
18 deg
Hydraulics
Blade Tip Angle - Front
40 deg
Blade Tip Angle - Rear
5 deg
Max Lift Above Ground
17.80 in / 452 mm
Max Reach Outside Tires - Left
87.60 ft / 26.70 m
Max Reach Outside Tires - Right
89.10 ft / 27.16 m
Shift Left
33.40 in / 848 mm
Shift Right
34.70 in / 881 mm
Related Machines
Frequently Asked Questions
How does the Caterpillar 160H compare to similar Motor Grader models? +
You can compare the Caterpillar 160H side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.