Overview
The Caterpillar 297C Multi Terrain Loader is a multi terrain loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 90 hp, operating weight of 10,139 lb, capacity of 0.6 yd³, fuel capacity of 25.9 gal and hydraulic capacity of 15.1 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 297C Multi Terrain Loader against similar multi terrain loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
10,139
lb
Net Power
89.50
hp
Gross Power
94
hp
Bucket Capacity
0.60
yd3
Full Specifications
79 specs
Dimensions
Breakout Force
7,308 lb / 3,315 kg
Bucket Pin Height - Carry Position
7.80 ft / 2.38 m
Bucket Pin Height - Maximum Lift
10.76 ft / 3.28 m
Bucket Pin Reach - Maximum Lift
14.90 ft / 4.54 m
Clearance At Max Lift And Dump
8.16 ft / 2.49 m
Clearance At Maximum Lift And Dump
97.90 ft / 29.84 m
Ground Clearance
8.81 ft / 2.69 m
Height - Top Of Cab
6.95 ft / 2.12 m
Height to Top of Cab
6.94 ft / 2.12 m
Length - Track On Ground
71.20 in / 1,808 mm
Length - With Bucket On Ground
150.90 in / 3,833 mm
Length - Without Bucket
122.60 in / 3,114 mm
Length With Bucket
12.58 ft / 3.83 m
Length With Out Bucket
10.22 ft / 3.12 m
Length of Track on Ground
5.94 ft / 1.81 m
Maximum Overall Height
162 in / 4,115 mm
Maximum Reach - With Arms Parallel
50.10 ft / 15.27 m
Overall Length - Track
90 in / 2,286 mm
Reach At Max Lift And Dump
2.52 ft / 0.77 m
Reach At Maximum Lift/Dump
30.20 ft / 9.20 m
Turn Radius From Center - Bucket
91.80 ft / 27.98 m
Turn Radius From Center - Coupler
58.50 ft / 17.83 m
Turn Radius From Center - Rear
69.30 ft / 21.12 m
Turning Radius From Center - Inc Bucket
91.78 ft / 27.97 m
Turning Radius From Center - Machine Rear
69.26 ft / 21.11 m
Vehicle Width
78 in / 1,981 mm
Width Over Tracks
6.50 ft / 1.98 m
Engine
Alternator Supplied Amperage
90 A
Bore
3.70 in / 94 mm
Bucket Capacity
0.60 yd³ / 0.46 m³
Cooling System Fluid Capacity
3.70 gal / 14.0 L
Displacement
201 cu in / 3.3 L
Engine Make
2236
Engine Model
C3.4 DIT
Engine Oil Capacity
2.70 gal / 10.2 L
Engine Power - Iso 14396
93 hp / 69.4 kW
Fuel Capacity
25.90 gal / 98.0 L
Fuel Tank
26 gal / 98.4 L
Gross Power
94 hp / 70.1 kW
Gross Power - Sae J1995
94 hp / 70.1 kW
Hydraulic System Fluid Capacity
15.10 gal / 57.2 L
Hydraulic Tank
11 gal / 41.6 L
Max Speed - High Range
9.30 mph / 15.0 km/h
Max Speed - Low Range
5.60 mph / 9.0 km/h
Net Power
90 hp / 67.1 kW
Net Power - Eec 80/1269
91 hp / 67.9 kW
Net Power - Iso 9249 Eec
91 hp / 67.9 kW
Net Power - Sae 1349
90 hp / 67.1 kW
Number of Cylinders
4
Operating Load
4,561 lb / 2,069 kg
Operating Voltage
12 V
Operating Weight
10,139 lb / 4,599 kg
Power Measured @
2,500 rpm
Pump Flow
22.20 gal/min / 84.0 L/min
Relief Valve Pressure
3,336 psi / 230.0 bar
Stroke
4.70 in / 119 mm
Tipping Angle
8,585 deg
Travel Speed Forward
5.60 mph / 9.0 km/h
Travel Speed Forward - 2-Speed Option
9.30 mph / 15.0 km/h
Travel Speed Reverse
5.60 mph / 9.0 km/h
Travel Speed Reverse - 2-Speed Option
9.30 mph / 15.0 km/h
Hydraulics
Fops
SAE J1043 SEPT87, ISO 3449:1992 Level I
Fops Level Ii
SAE J231 JAN81, ISO 3449:1992 Level II
Hydraulic Power
43 hp / 31.9 kW
Loader Hydraulic Flow
22 gal/min / 83.3 L/min
Loader Hydraulic Pressure
3,335 psi / 229.9 bar
Maximum Loader Hydraulic Flow
33 gal/min / 124.9 L/min
Maximum Loader Hydraulic Pressure
4,061 psi / 280.0 bar
Net Power
90 hp / 66.7 kW
Rops
SAE J1040 MAY94, ISO 3471:1994
Other
Breakout Force - Tilt Cylinder
7,308 lb / 3,315 kg
Rated Operating Capacities - 35% Tipping Load
3,005 lb / 1,363 kg
Rated Operating Capacities - 50% Tipping Load
4,200 lb / 1,905 kg
Rated Operating Capacity With Optional Counterweight
4,561 lb / 2,069 kg
Tipping Load
8,585 lb / 3,894 kg
Cooling System
3.70 gal / 14.0 L
Engine Crankcase
2.60 gal / 9.8 L
Undercarriage
Ground Contact Area
2,542 in² / 16,400.0 cm²
Ground Pressure
4 psi / 0.3 bar
Frequently Asked Questions
What is the operating weight of the Caterpillar 297C Multi Terrain Loader? +
The Caterpillar 297C Multi Terrain Loader has an operating weight of 10,139 lb (4,599 kg). This places it in a class suited for multi terrain loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 297C Multi Terrain Loader engine? +
The Caterpillar 297C Multi Terrain Loader produces 94 hp (70.1 kW) of engine power. This output is typical for its weight class and designed to handle demanding Multi Terrain Loader work cycles efficiently.
How does the Caterpillar 297C Multi Terrain Loader compare to similar Multi Terrain Loader models? +
You can compare the Caterpillar 297C Multi Terrain Loader side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.