Overview
The Caterpillar 416C Loader Backhoe is a backhoe loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 75 hp, capacity of 1.0 yd³, fuel capacity of 33.9 gal and hydraulic capacity of 43.10 gal/min. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 416C Loader Backhoe against similar backhoe loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
75
hp
Gross Power
78
hp
Dig Depth - Std
14.51
ft
Bucket Capacity
1
yd3
Full Specifications
75 specs
Dimensions
Bucket Breakout Force
9,030 lb / 4,096 kg
Bucket Breakout Force - Single Tilt
35 lb / 16 kg
Bucket Capacity - General Purpose
8.66 yd³ / 6.62 m³
Bucket Dig Force - Ext
12,065 lb / 5,473 kg
Bucket Dig Force - Standard
3,000 lb / 1,361 kg
Bucket Dig Force - Std
11,700 lb / 5,307 kg
Bucket Rotation
43 deg
Bucket Width
89.06 in / 2,262 mm
Bucket Width - General Purpose
2.42 ft / 0.74 m
Dig Depth
4.14 ft / 1.26 m
Dig Depth - Ext
18.20 ft / 5.55 m
Dig Depth - Single Tilt
1.25 ft / 0.38 m
Dig Depth - Standard
14.50 ft / 4.42 m
Dig Depth - Std
14.51 ft / 4.42 m
Dump Height At Maximum Angle - Single Tilt
4 ft / 1.22 m
Dump Reach At Maximum Angle - Single Tilt
89 ft / 27.13 m
E-Stick Extended (1)
18.16
E-Stick Extended (2)
21.90
E-Stick Extended (3)
7,836
E-Stick Extended (4)
18.50
E-Stick Extended (5)
5,780
E-Stick Retracted (1)
18.68
E-Stick Retracted (2)
7,704
E-Stick Retracted (3)
8,839
E-Stick Retracted (4)
5.83
Ground Clearance
0.98 ft / 0.30 m
Height To Top Of Suspended Cab
9.09 ft / 2.77 m
Lift Capacity At Full Height
5,780 in / 146,812 mm
Load Height - Ext
13.86 ft / 4.22 m
Load Height - Std
11.43 ft / 3.48 m
Reach At Load Height - Ext
8.88 ft / 2.71 m
Reach At Load Height - Std
5.79 ft / 1.76 m
Reach At Max Dump Height
2.40 ft / 0.73 m
Reach From Swing Pivot - Standard
18.50 ft / 5.64 m
Stick Dig Force - Standard
9,894 lb / 4,488 kg
Stick Lift At 2440 Mm (8 Ft) - Standard
11.42
Transport Height
11.77 ft / 3.59 m
Transport Length
22.91 ft / 6.98 m
Transport Width
7.72 ft / 2.35 m
Wheelbase
6.89 ft / 2.10 m
Engine
11L-16, 12PR, F3
2
Bucket Capacity
1 yd³ / 0.76 m³
Cat 3054T Diesel Engine
Gross Power - Optional - Sae J1995
Displacement
244 cu in / 4.0 L
Engine Make
2236
Engine Model
3054 DIT
Engine Model - Standard
3,054
Fuel Capacity
33.90 gal / 128.3 L
Fuel Tank
33.90 gal / 128.3 L
Gross Power
78 hp / 58.2 kW
Gross Power - Optional - Sae J1995
84 hp / 62.6 kW
Gross Power - Sae J1995
78 hp / 58.2 kW
Hydraulic Tank
10.10 gal / 38.2 L
Max Speed - Forward
20.40 mph / 32.8 km/h
Max Speed Reverse
20.40 mph / 32.8 km/h
Net Power
75 hp / 55.9 kW
Net Power - Sae J1349
75 hp / 55.9 kW
Number of Cylinders
4
Number of Forward Gears
4
Number of Reverse Gears
4
Operating Weight - Maximum
21,389 lb / 9,702 kg
Operating Weight - Nominal
13,892 lb / 6,301 kg
Operating Weight 2wd
13,960 lb / 6,332 kg
Operational
Operating Weight 2wd
Power Measured @
2,200 rpm
Rear Axle
6 lb / 3 kg
cu in
1,349
Hydraulics
Dynamic (1)
6,982.10
Dynamic (2)
20,414.80
Engine Oil - With Filter
2 gal / 7.6 L
Front Axle (2wd) - Static
30,314 lb / 13,750 kg
Front Axle (4wd)
2 lb / 1 kg
Pump Flow Capacity
43.10 gal/min / 163.2 L/min
Rear Axle - Static
61,222 lb / 27,770 kg
System Pressure
3,002 psi / 207.0 bar
Related Machines
Frequently Asked Questions
How powerful is the Caterpillar 416C Loader Backhoe engine? +
The Caterpillar 416C Loader Backhoe produces 78 hp (58.2 kW) of engine power. This output is typical for its weight class and designed to handle demanding Backhoe Loader work cycles efficiently.
How does the Caterpillar 416C Loader Backhoe compare to similar Backhoe Loader models? +
You can compare the Caterpillar 416C Loader Backhoe side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.