Overview
The Caterpillar 730C is a articulated dump truck listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 367 hp, capacity of 11.3 yd3, fuel capacity of 108.8 gal and hydraulic capacity of 29.1 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 730C against similar articulated dump truck models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
362
hp
Gross Power
375
hp
Rated Payload
62,000
lb
Full Specifications
79 specs
Dimensions
Capacity - Heaped
23 yd³ / 17.58 m³
Capacity - Struck
17.40 yd³ / 13.30 m³
Dump Angle
45 deg
Rated Payload
62,000 lb / 28,123 kg
Engine
Bore
5.20 in / 132 mm
Center Axle - Empty
10,384 lb / 4,710 kg
Center Axle - Loaded
27,249 lb / 12,360 kg
Cooling System Fluid Capacity
21.90 gal / 82.9 L
Displacement
763 cu in / 12.5 L
Engine Make
2236
Engine Model
C13
Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv
13
Forward - 1
5 mph / 8.0 km/h
Forward - 2
9 mph / 14.5 km/h
Forward - 3
14 mph / 22.5 km/h
Forward - 4
21 mph / 33.8 km/h
Forward - 5
29 mph / 46.7 km/h
Forward - 6
34 mph / 54.7 km/h
Front Axle - Empty
33,091 lb / 15,010 kg
Front Axle - Loaded
7,231 lb / 3,280 kg
Fuel Capacity
108.80 gal / 411.9 L
Fuel Tank
108.80 gal / 411.9 L
Gross Power
375 hp / 279.6 kW
Gross Power - Sae J1995
375 hp / 279.6 kW
Hydraulic System Fluid Capacity
29.10 gal / 110.2 L
Max Torque
1,579 lb-ft / 2,141 Nm
Net Power
367 hp / 273.7 kW
Net Power - Iso 14396
370 hp / 275.9 kW
Net Power - Sae J1349
367 hp / 273.7 kW
No Engine De-Rating Required Below
12,500
Number of Forward Gears
6
Number of Reverse Gears
1
Peak Engine Torque Gross (Sae J1995)
1,579 lb-ft / 2,141 Nm
Peak Engine Torque Net (Iso 14396)
1,564 lb-ft / 2,120 Nm
Peak Engine Torque Speed
1,200 lb-ft / 1,627 Nm
Rear Axle - Empty
9,656 lb / 4,380 kg
Rear Axle - Loaded
27,249 lb / 12,360 kg
Reverse - 1
6 mph / 9.7 km/h
Steering
ISO 5010 - 2007
Stroke
6.20 in / 157 mm
Torque Measured @
1,200 rpm
Total Empty
53,131 lb / 24,100 kg
Total Loaded
61,729 lb / 28,000 kg
Transmission Fluid Capacity
9.20 gal / 34.8 L
Hydraulics
Body Capacities
2
Body Plate Type
450
Cab - Fops
3,449
Cab - Rops
3,471
Capacity - Heaped
11.30 yd³ / 8.64 m³
Center Axle - Loaded
37,633 lb / 17,070 kg
Center Axle - Rated Load
27,249 lb / 12,360 kg
Def Tank (Iso 2224-1)
5.30 gal / 20.1 L
Final Drives/Differential
35.70
Front Axle - Loaded
40,322 lb / 18,290 kg
Front Axle - Rated Load
7,231 lb / 3,280 kg
Heaped (Sae 2:1)
23
Interior Cab
76
Lower Time
8 sec
Net Power
362 hp / 269.9 kW
Note
23.50
Output Transfer Gear Box
6.30
Raise Time
12 sec
Rear Axle - Loaded
36,905 lb / 16,740 kg
Rear Axle - Rated Load
27,249 lb / 12,360 kg
Tailgate Heaped Sae 2:1
24.60
Tailgate Struck
18.20
Total - Empty
53,131 lb / 24,100 kg
Total - Loaded
114,860 lb / 52,100 kg
Total - Rated Load
61,729
Turning Dimensions - Aisle Width
210 in / 5,334 mm
Turning Dimensions - Clearance Radius
318 ft / 96.93 m
Turning Dimensions - Inside Radius
153 ft / 46.63 m
Turning Dimensions - Sae Turning Radius
294 ft / 89.61 m
Turning Dimensions - Steer Angle - Left/Right
45 deg
Other
Brakes
ISO 3450 - 2011
Cooling System
21.90 gal / 82.9 L
Engine Crankcase
10.50 gal / 39.7 L
Struck
17.40
Transmission
9.2
Related Machines
Frequently Asked Questions
How powerful is the Caterpillar 730C engine? +
The Caterpillar 730C produces 375 hp (279.6 kW) of engine power. This output is typical for its weight class and designed to handle demanding Articulated Dump Truck work cycles efficiently.
How does the Caterpillar 730C compare to similar Articulated Dump Truck models? +
You can compare the Caterpillar 730C side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.