Overview
The Champion 710A is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 140 hp, fuel capacity of 100.0 gal and hydraulic capacity of 23.8 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Champion 710A against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
30,630
lb
Net Power
140
hp
Moldboard Width
12.10
ft
Overall Length
27.75
ft
Full Specifications
54 specs
Dimensions
Blade Base
8.59 in / 218 mm
Overall Height With Cab
11.09 ft / 3.38 m
Overall Length
27.75 ft / 8.46 m
Overall Width
8.17 ft / 2.49 m
Tread Width
82.01 in / 2,083 mm
Wheelbase
20 ft / 6.10 m
Engine
Articulation Angle
22 deg
Blade Down Pressure
16,495 lb / 7,482 kg
Blade Pull At Max Weight
19,110 lb / 8,668 kg
Bore
4.10 in / 104 mm
Cooling System Fluid Capacity
11.70 gal / 44.3 L
Displacement
360 cu in / 5.9 L
Engine Model
6B5.9
Fuel Capacity
100 gal / 378.5 L
Gross Horsepower
148 hp / 110.4 kW
Ground Clearance
2 ft / 0.61 m
Hydraulic System Fluid Capacity
23.80 gal / 90.1 L
Max Reach Outside - Left
10 ft / 3.05 m
Max Reach Outside - Right
10.10 ft / 3.08 m
Max Speed - Forward
24.50 mph / 39.4 km/h
Max Speed - Reverse
17.80 mph / 28.6 km/h
Moldboard Height
25 in / 635 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12.10 ft / 3.69 m
Net Power
140 hp / 104.4 kW
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Oil System Fluid Capacity
4.40 gal / 16.7 L
Oscillation - Total
16 deg
Power Measured @
2,200 rpm
Pump Flow
50.50 gal/min / 191.2 L/min
Rear Diff/Final Drive Fluid Capacity
6.10 gal / 23.1 L
Relief Valve Pressure
2,500 psi / 172.4 bar
Side Shift Left
26.50 in / 673 mm
Side Shift Right
26.50 in / 673 mm
Std Operation Weight - Front Axle
9,400 lb / 4,264 kg
Std Operation Weight - Rear Axle
21,230 lb / 9,630 kg
Std Operation Weight - Total
30,630 lb / 13,894 kg
Stroke
4.80 in / 122 mm
Tandem Case Fluid Capacity (Each)
26.50 gal / 100.3 L
Torque
440 lb-ft / 597 Nm
Torque Measured @
1,600 rpm
Transmission Fluid Capacity
10.30 gal / 39.0 L
Turning Radius
25.50 ft / 7.77 m
Wheel Lean
18 deg
Hydraulics
Blade Cutting Depth
2.80 ft / 0.85 m
Blade Ground Clearance
1.50 ft / 0.46 m
Blade Tip Angle - Front
47 deg
Blade Tip Angle - Rear
5 deg
Diameter
66.30 in / 1,684 mm
Rotation
360 deg
Shift Left
30.60 in / 777 mm
Shift Right
29.50 in / 749 mm
Related Machines
Frequently Asked Questions
How powerful is the Champion 710A engine? +
The Champion 710A produces 140 hp (104.4 kW) of engine power. This output is typical for its weight class and designed to handle demanding Motor Grader work cycles efficiently.
How does the Champion 710A compare to similar Motor Grader models? +
You can compare the Champion 710A side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.