Overview
The Champion 730A is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 100.0 gal and hydraulic capacity of 23.8 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Champion 730A against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
33,220
lb
Max Power
193
hp
Moldboard Width
12.10
ft
Overall Length
27.84
ft
Full Specifications
50 specs
Dimensions
Blade Base
8.51 in / 216 mm
Overall Height With Cab
11.17 ft / 3.40 m
Overall Length
27.84 ft / 8.49 m
Overall Width
8.34 ft / 2.54 m
Tread Width
82.01 in / 2,083 mm
Wheelbase
20 ft / 6.10 m
Engine
Articulation Angle
22 deg
Bore
4.50 in / 114 mm
Cooling System Fluid Capacity
11.30 gal / 42.8 L
Displacement
505 cu in / 8.3 L
Engine Model
6CT8.3
Fuel Capacity
100 gal / 378.5 L
Gross Horsepower
207 hp / 154.4 kW
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
23.80 gal / 90.1 L
Max Power
193 hp / 143.9 kW
Max Reach Outside - Left
9.80 ft / 2.99 m
Max Reach Outside - Right
9.50 ft / 2.90 m
Max Speed - Forward
26.30 mph / 42.3 km/h
Max Speed - Reverse
18.90 mph / 30.4 km/h
Moldboard Height
25 in / 635 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12.10 ft / 3.69 m
Number of Cylinders
6
Oil System Fluid Capacity
10.10 gal / 38.2 L
Oscillation - Total
16 deg
Power Measured @
2,100 rpm
Pump Flow
48.20 gal/min / 182.5 L/min
Rear Diff/Final Drive Fluid Capacity
6.10 gal / 23.1 L
Relief Valve Pressure
2,500 psi / 172.4 bar
Side Shift Left
26.50 in / 673 mm
Side Shift Right
26.50 in / 673 mm
Std Operation Weight - Front Axle
9,960 lb / 4,518 kg
Std Operation Weight - Rear Axle
23,260 lb / 10,551 kg
Std Operation Weight - Total
33,220 lb / 15,068 kg
Stroke
5.40 in / 137 mm
Tandem Case Fluid Capacity (Each)
26.50 gal / 100.3 L
Torque
540 lb-ft / 732 Nm
Torque Measured @
1,500 rpm
Transmission Fluid Capacity
10.30 gal / 39.0 L
Turning Radius
25.60 ft / 7.80 m
Wheel Lean
18 deg
Hydraulics
Blade Cutting Depth
2.50 ft / 0.76 m
Blade Ground Clearance
1.50 ft / 0.46 m
Blade Tip Angle - Front
44 deg
Blade Tip Angle - Rear
6.50 deg
Diameter
66.30 in / 1,684 mm
Rotation
360 deg
Shift Left
26 in / 660 mm
Shift Right
24.10 in / 612 mm
Related Machines
Frequently Asked Questions
How does the Champion 730A compare to similar Motor Grader models? +
You can compare the Champion 730A side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.