Overview
The Champion 740A is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 210 hp, fuel capacity of 100.0 gal and hydraulic capacity of 23.8 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Champion 740A against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
35,330
lb
Net Power
210
hp
Moldboard Width
12.10
ft
Overall Length
28.34
ft
Full Specifications
48 specs
Dimensions
Blade Base
8.92 in / 227 mm
Overall Height With Cab
11.17 ft / 3.40 m
Overall Length
28.34 ft / 8.64 m
Overall Width
8.34 ft / 2.54 m
Tread Width
84.10 in / 2,136 mm
Wheelbase
20.50 ft / 6.25 m
Engine
Articulation Angle
22 deg
Cooling System Fluid Capacity
12.70 gal / 48.1 L
Displacement
659 cu in / 10.8 L
Engine Model
M11
Fuel Capacity
100 gal / 378.5 L
Gross Horsepower
225 hp / 167.8 kW
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
23.80 gal / 90.1 L
Max Reach Outside - Left
9.80 ft / 2.99 m
Max Reach Outside - Right
9.50 ft / 2.90 m
Max Speed - Forward
26.60 mph / 42.8 km/h
Max Speed - Reverse
19.30 mph / 31.1 km/h
Moldboard Height
29.10 in / 739 mm
Moldboard Thickness
1 in / 25 mm
Moldboard Width
12.10 ft / 3.69 m
Net Power
210 hp / 156.6 kW
Number of Cylinders
6
Oil System Fluid Capacity
10.40 gal / 39.4 L
Oscillation - Total
16 deg
Power Measured @
2,100 rpm
Pump Flow
48.30 gal/min / 182.8 L/min
Rear Diff/Final Drive Fluid Capacity
6.10 gal / 23.1 L
Relief Valve Pressure
2,500 psi / 172.4 bar
Side Shift Left
26.50 in / 673 mm
Side Shift Right
26.50 in / 673 mm
Std Operation Weight - Front Axle
10,480 lb / 4,754 kg
Std Operation Weight - Rear Axle
24,850 lb / 11,272 kg
Std Operation Weight - Total
35,330 lb / 16,025 kg
Tandem Case Fluid Capacity (Each)
26.50 gal / 100.3 L
Torque Measured @
1,300 rpm
Transmission Fluid Capacity
10.30 gal / 39.0 L
Turning Radius
25.70 ft / 7.83 m
Wheel Lean
18 deg
Hydraulics
Blade Cutting Depth
2.50 ft / 0.76 m
Blade Ground Clearance
1.50 ft / 0.46 m
Blade Tip Angle - Front
48 deg
Blade Tip Angle - Rear
2.50 deg
Diameter
66.30 in / 1,684 mm
Max Lift Above Ground
20 in / 508 mm
Rotation
360 deg
Shift Left
26 in / 660 mm
Shift Right
24.10 in / 612 mm
Related Machines
Frequently Asked Questions
How powerful is the Champion 740A engine? +
The Champion 740A produces 210 hp (156.6 kW) of engine power. This output is typical for its weight class and designed to handle demanding Motor Grader work cycles efficiently.
How does the Champion 740A compare to similar Motor Grader models? +
You can compare the Champion 740A side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.