Overview
The Dressta RD165C is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 85.9 gal and hydraulic capacity of 31.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Dressta RD165C against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
31,526.20
lb
Max Power
160
hp
Moldboard Width
12
ft
Overall Length
28.55
ft
Full Specifications
44 specs
Dimensions
Blade Base
8.54 in / 217 mm
Height To Top Of Isomount Cab
11.49 ft / 3.50 m
Overall Length
28.55 ft / 8.70 m
Tandem Axle Wheelbase
4.92 ft / 1.50 m
Wheelbase
20.84 ft / 6.35 m
Width Over Tires
8.37 ft / 2.55 m
Engine
Alternator Supplied Amperage
75 A
Articulation Angle
27 deg
Cooling System Fluid Capacity
10.60 gal / 40.1 L
Displacement
409 cu in / 6.7 L
Engine Make
2347
Engine Model
QSB 6.7
Fuel Capacity
85.90 gal / 325.2 L
Ground Clearance
2 ft / 0.61 m
Hydraulic System Fluid Capacity
31 gal / 117.3 L
Max Depth Of Cut
13.80 ft / 4.21 m
Max Power
160 hp / 119.3 kW
Max Speed - Forward
24.90 mph / 40.1 km/h
Max Speed - Reverse
16.80 mph / 27.0 km/h
Moldboard Height
25.60 in / 650 mm
Moldboard Thickness
0.70 in / 18 mm
Moldboard Width
12 ft / 3.66 m
Net Power Gear 5-6
160 hp / 119.3 kW
Net Torque Gears 5-6
590 lb-ft / 800 Nm
Number Of Gears - Forward
6
Number Of Gears - Reverse
3
Number of Cylinders
6
Operating Voltage
24 V
Oscillation - Total
40 deg
Power Measured @
2,500 rpm
Pump Flow
16.30 gal/min / 61.7 L/min
Rear Diff/Final Drive Fluid Capacity
9.30 gal / 35.2 L
Relief Valve Pressure
2,031 psi / 140.0 bar
Side Shift Left
31.50 in / 800 mm
Side Shift Right
31.50 in / 800 mm
Std Operation Weight - Total
31,526 lb / 14,300 kg
Tandem Case Fluid Capacity (Each)
6.70 gal / 25.4 L
Torque Measured @
1,500 rpm
Transmission Fluid Capacity
9.30 gal / 35.2 L
Turning Radius
23 ft / 7.01 m
Wheel Lean
22 deg
Hydraulics
Diameter
53.20 in / 1,351 mm
Max Lift Above Ground
19.70 in / 500 mm
Rotation
360 deg
Related Machines
Frequently Asked Questions
How does the Dressta RD165C compare to similar Motor Grader models? +
You can compare the Dressta RD165C side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.