Overview
The Dressta RD200C is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 100.4 gal and hydraulic capacity of 34.4 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Dressta RD200C against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
80,195.40
lb
Max Power
178
hp
Moldboard Width
12.10
ft
Overall Length
31.30
ft
Full Specifications
44 specs
Dimensions
Blade Base
10.01 in / 254 mm
Height To Top Of Isomount Cab
10.83 ft / 3.30 m
Overall Length
31.30 ft / 9.54 m
Tandem Axle Wheelbase
5.06 ft / 1.54 m
Wheelbase
23.96 ft / 7.30 m
Width Over Tires
8.21 ft / 2.50 m
Engine
Alternator Supplied Amperage
75 A
Articulation Angle
25 deg
Cooling System Fluid Capacity
10.60 gal / 40.1 L
Displacement
409 cu in / 6.7 L
Engine Make
2347
Engine Model
QSB 6.7
Fuel Capacity
100.40 gal / 380.1 L
Ground Clearance
1.90 ft / 0.58 m
Hydraulic System Fluid Capacity
34.40 gal / 130.2 L
Max Depth Of Cut
13.80 ft / 4.21 m
Max Power
178 hp / 132.7 kW
Max Speed - Forward
27.80 mph / 44.7 km/h
Max Speed - Reverse
19.60 mph / 31.5 km/h
Moldboard Height
26.40 in / 671 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12.10 ft / 3.69 m
Net Power Gear 5-6
178 hp / 132.7 kW
Net Torque Gears 5-6
685 lb-ft / 929 Nm
Number Of Gears - Forward
6
Number Of Gears - Reverse
3
Number of Cylinders
6
Operating Voltage
24 V
Oscillation - Total
40 deg
Power Measured @
2,400 rpm
Pump Flow
21.20 gal/min / 80.3 L/min
Rear Diff/Final Drive Fluid Capacity
2 gal / 7.6 L
Relief Valve Pressure
2,031 psi / 140.0 bar
Side Shift Left
31.50 in / 800 mm
Side Shift Right
31.50 in / 800 mm
Std Operation Weight - Total
80,195 lb / 36,376 kg
Tandem Case Fluid Capacity (Each)
8 gal / 30.3 L
Torque Measured @
1,500 rpm
Transmission Fluid Capacity
9.30 gal / 35.2 L
Turning Radius
24,606.30 ft / 7,500.00 m
Wheel Lean
22 deg
Hydraulics
Diameter
53.20 in / 1,351 mm
Max Lift Above Ground
19.70 in / 500 mm
Rotation
360 deg
Related Machines
Frequently Asked Questions
How does the Dressta RD200C compare to similar Motor Grader models? +
You can compare the Dressta RD200C side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.