Overview
The Dynapac CP2100W is a pneumatic roller listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 119 hp, travel speed of 14.3 mph and fuel capacity of 55.5 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Dynapac CP2100W against similar pneumatic roller models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Gross Power
119.40
hp
Overall Length
203.94
in
Overall Width
7.44
ft
Full Specifications
20 specs
Dimensions
Height To Top Of Rops
9.81 ft / 2.99 m
Max - Tyre Pressure
123 psi / 8.5 bar
Min - Tyre Pressure
36 psi / 2.5 bar
Overall Length
203.94 in / 5,180 mm
Overall Width
7.44 ft / 2.27 m
Rolling Width
89.20 in / 2,266 mm
Turning Radius - Outside
26.23 ft / 7.99 m
Tyre Overlap
1.70
Wheel Loads - With Max. Ballast
6,613.90
Wheel Loads_Without Ballast
2,976.30
Wheelbase
13.13 ft / 4.00 m
Engine
Engine Model
QSB 3.8
Fuel Capacity
55.50 gal / 210.1 L
Gross Power
119 hp / 89.0 kW
Max Speed
14.30 mph / 23.0 km/h
Operating Voltage
24 V
Operating Weight - Max Ballast
46,297 lb / 21,000 kg
Operating Weight - Standard
20,834 lb / 9,450 kg
Power Measured @
2,200 rpm
Water Spray Tank Fluid Capacity
109.70 gal / 415.3 L
Related Machines
Related Guides & Articles
Frequently Asked Questions
How powerful is the Dynapac CP2100W engine? +
The Dynapac CP2100W produces 119 hp (89.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Pneumatic Roller work cycles efficiently.
How does the Dynapac CP2100W compare to similar Pneumatic Roller models? +
You can compare the Dynapac CP2100W side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.