Overview
The Fiat-Hitachi FG105 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 79.0 gal and hydraulic capacity of 25.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Fiat-Hitachi FG105 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Max Power
197.20
hp
Moldboard Width
9.10
ft
Overall Length
27.96
ft
Full Specifications
53 specs
Dimensions
Blade Base
8.67 in / 220 mm
Front Ground Clearance
2.09 ft / 0.64 m
Height To Top Of Isomount Cab
10.96 ft / 3.34 m
Overall Length
27.96 ft / 8.52 m
Rear Ground Clearance
1.09 ft / 0.33 m
Tandem Axle Wheelbase
19.59 ft / 5.97 m
Wheelbase
5.05 ft / 1.54 m
Width Over Tires
8.34 ft / 2.54 m
Engine
Alternator Supplied Amperage
45 A
Articulation Angle
25 deg
Blade Down Pressure
17,174 lb / 7,790 kg
Circle Gearbox Fluid Capacity
0.80 gal / 3.0 L
Cooling System Fluid Capacity
7.20 gal / 27.3 L
Displacement
507 cu in / 8.3 L
Engine Make
2347
Engine Model
6 CT8.3
Fuel Capacity
79 gal / 299.0 L
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
25 gal / 94.6 L
Max Depth Of Cut
6.50 ft / 1.98 m
Max Operation Weight - Front Axle
9,282 lb / 4,210 kg
Max Operation Weight - Rear Axle
25,111 lb / 11,390 kg
Max Operation Weight - Total
34,392 lb / 15,600 kg
Max Power
197 hp / 147.1 kW
Max Speed - Forward
26.10 mph / 42.0 km/h
Max Speed - Reverse
17.10 mph / 27.5 km/h
Moldboard Height
37.60 in / 955 mm
Moldboard Width
9.10 ft / 2.77 m
Net Power Gear 5-6
197 hp / 147.1 kW
Net Torque Gears 7-8
555 lb-ft / 753 Nm
Number Of Gears - Forward
6
Number Of Gears - Reverse
3
Number of Cylinders
6
Oil System Fluid Capacity
5.40 gal / 20.4 L
Operating Voltage
24 V
Oscillation - Total
19 deg
Power Measured @
2,300 rpm
Pump Flow
43.10 gal/min / 163.2 L/min
Rear Diff/Final Drive Fluid Capacity
11.10 gal / 42.0 L
Relief Valve Pressure
414 psi / 28.6 bar
Side Shift Left
21 in / 533 mm
Side Shift Right
27 in / 686 mm
Tandem Case Fluid Capacity (Each)
8.10 gal / 30.7 L
Torque Measured @
1,500 rpm
Transmission Fluid Capacity
6.70 gal / 25.4 L
Turning Radius
32.80 ft / 10.00 m
Wheel Lean
17.50 deg
Hydraulics
Blade Tip Angle - Rear
27.50 deg
Diameter
69.10 in / 1,755 mm
Max Lift Above Ground
24.50 in / 622 mm
Max Reach Outside Tires - Left
69.30 ft / 21.12 m
Max Reach Outside Tires - Right
81 ft / 24.69 m
Rotation
360 deg
Related Machines
Frequently Asked Questions
How does the Fiat-Hitachi FG105 compare to similar Motor Grader models? +
You can compare the Fiat-Hitachi FG105 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.