Overview
The Hamm 3625 HT is a vibratory smooth drum roller listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include travel speed of 10.0 mph and fuel capacity of 76.7 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Hamm 3625 HT against similar vibratory smooth drum roller models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Overall Length
250.20
in
Full Specifications
34 specs
Dimensions
Angle Of Driving Slope-Front
32 deg
Angle Of Driving Slope-Rear
27 deg
Ground Clearance
16.74 ft / 5.10 m
Height to Top of Cab
10.06 ft / 3.07 m
Loadover Height
7.75 ft / 2.36 m
Overall Length
250.20 in / 6,355 mm
Turning Radius - Inside
16.21 ft / 4.94 m
Wheelbase
127.17 ft / 38.76 m
Width Over Cab
98.04 in / 2,490 mm
Engine
Axle Load - Front
35,528 lb / 16,115 kg
Axle Load - Rear
19,114 lb / 8,670 kg
Centrifugal Force - High
74,412 lb / 33,753 kg
Centrifugal Force - Low
54,629 lb / 24,779 kg
Drum Diameter
63 in / 1,600 mm
Drum Thickness
1.80 in / 46 mm
Drum Width
87.50 in / 2,223 mm
EU Stage IIIA / EPA Tier 3
14,396
Emissions Certification
EU Stage IIIA / EPA Tier 3
Engine Model
TCD 2012 L04 2V
Engine Power@Iso 14396
208 hp / 155.0 kW
Engine Power@Saej1349
208 hp / 155.0 kW
Fuel Capacity
76.70 gal / 290.3 L
Max Speed
10 mph / 16.1 km/h
Max Weight
55,226 lb / 25,050 kg
Nominal Amplitude - High
0.10 in / 3 mm
Nominal Amplitude - Low
0.10 in / 3 mm
Number of Cylinders
6
Operating Weight Cabin
54,642 lb / 24,785 kg
Operating Weight Rops
54,157 lb / 24,565 kg
Oscillating Angle
10 deg
Power Measured @
2,300 rpm
Static Linear Load
406.60 lb/in
Vibration Frequency 1
25 Hz
Vibration Frequency 2
28 Hz
Frequently Asked Questions
How does the Hamm 3625 HT compare to similar Vibratory Smooth Drum Roller models? +
You can compare the Hamm 3625 HT side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.