Overview
The Hamm H16i is a vibratory smooth drum roller listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include travel speed of 10.0 mph and fuel capacity of 74.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Hamm H16i against similar vibratory smooth drum roller models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Overall Length
234.26
in
Full Specifications
34 specs
Dimensions
Angle Of Driving Slope-Front
53 deg
Angle Of Driving Slope-Rear
32 deg
Ground Clearance
15.36 ft / 4.68 m
Height to Top of Cab
9.72 ft / 2.96 m
Loadover Height
7.58 ft / 2.31 m
Overall Length
234.26 in / 5,950 mm
Turning Radius - Inside
12.70 ft / 3.87 m
Wheelbase
124.02 ft / 37.80 m
Width Over Cab
91.11 in / 2,314 mm
Engine
Axle Load - Front
23,579 lb / 10,695 kg
Axle Load - Rear
12,644 lb / 5,735 kg
Centrifugal Force - High
73,737 lb / 33,447 kg
Centrifugal Force - Low
58,226 lb / 26,411 kg
Diesel Fuel Tank Capacity - Standard Tank
8.50 gal / 32.2 L
Drum Diameter
59.30 in / 1,506 mm
Drum Thickness
1.80 in / 46 mm
Drum Width
84.30 in / 2,141 mm
Emissions Certification
EU Stage IV / EPA Tier 4
Engine Model
TCD 4.1 L4
Engine Power@Iso 14396
154 hp / 115.1 kW
Engine Power@Saej1349
154 hp / 115.1 kW
Fuel Capacity
74 gal / 280.1 L
Max Speed
10 mph / 16.1 km/h
Max Weight
42,858 lb / 19,440 kg
Nominal Amplitude - High
0.10 in / 3 mm
Nominal Amplitude - Low
0.10 in / 3 mm
Number of Cylinders
4
Operating Weight Cabin
36,222 lb / 16,430 kg
Operating Weight Rops
35,803 lb / 16,240 kg
Oscillating Angle
10 deg
Power Measured @
2,300 rpm
Static Linear Load
503 lb/in
Vibration Frequency 1
28 Hz
Vibration Frequency 2
31 Hz
Frequently Asked Questions
How does the Hamm H16i compare to similar Vibratory Smooth Drum Roller models? +
You can compare the Hamm H16i side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.