Overview
The John Deere Construction & Forestry John Deere 772A is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 70.0 gal and hydraulic capacity of 41.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the John Deere Construction & Forestry John Deere 772A against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
30,903
lb
Max Power
150
hp
Moldboard Width
12
ft
Overall Length
27.79
ft
Full Specifications
55 specs
Dimensions
Blade Base
8.93 in / 227 mm
Front Ground Clearance
1.88 ft / 0.57 m
Height To Top Of Isomount Cab
10.50 ft / 3.20 m
Overall Length
27.79 ft / 8.47 m
Tandem Axle Wheelbase
5.06 ft / 1.54 m
Wheelbase
19.59 ft / 5.97 m
Width Over Tires
8.01 ft / 2.44 m
Engine
Alternator Supplied Amperage
42 A
Articulation Angle
25 deg
Circle Gearbox Fluid Capacity
1.10 gal / 4.2 L
Cooling System Fluid Capacity
7 gal / 26.5 L
Displacement
466 cu in / 7.6 L
Engine Make
2240
Engine Model
6-466A
Fuel Capacity
70 gal / 265.0 L
Ground Clearance
1.90 ft / 0.58 m
Hydraulic System Fluid Capacity
41 gal / 155.2 L
Max Operation Weight - Front Axle
9,780 lb / 4,436 kg
Max Operation Weight - Rear Axle
24,712 lb / 11,209 kg
Max Operation Weight - Total
34,492 lb / 15,645 kg
Max Power
150 hp / 111.9 kW
Max Speed - Forward
25.10 mph / 40.4 km/h
Max Speed - Reverse
8.60 mph / 13.8 km/h
Moldboard Height
24 in / 610 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12 ft / 3.66 m
Net Power Gears 7-8
150 hp / 111.9 kW
Net Torque Gears 7-8
465 lb-ft / 630 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Oil System Fluid Capacity
5 gal / 18.9 L
Operating Voltage
24 V
Oscillation - Total
30 deg
Power Measured @
2,300 rpm
Pump Flow
36 gal/min / 136.3 L/min
Side Shift Left
26.90 in / 683 mm
Side Shift Right
26.90 in / 683 mm
Std Operation Weight - Front Axle
9,237 lb / 4,190 kg
Std Operation Weight - Rear Axle
21,666 lb / 9,828 kg
Std Operation Weight - Total
30,903 lb / 14,017 kg
Tandem Case Fluid Capacity (Each)
5 gal / 18.9 L
Tire Size
14 in / 356 mm
Torque Measured @
1,300 rpm
Turning Radius
22.60 ft / 6.89 m
Wheel Lean
20 deg
Hydraulics
Blade Tip Angle - Front
44 deg
Blade Tip Angle - Rear
10 deg
Diameter
59.10 in / 1,501 mm
Max Lift Above Ground
17.10 in / 434 mm
Max Reach Outside Tires - Left
89.80 ft / 27.37 m
Max Reach Outside Tires - Right
88.60 ft / 27.01 m
Rotation
360 deg
Shift Left
33.60 in / 853 mm
Shift Right
32.10 in / 815 mm
Related Machines
Frequently Asked Questions
How does the John Deere Construction & Forestry John Deere 772A compare to similar Motor Grader models? +
You can compare the John Deere Construction & Forestry John Deere 772A side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.