Overview
The John Deere Construction & Forestry John Deere 772CH is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 106.0 gal and hydraulic capacity of 15.6 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the John Deere Construction & Forestry John Deere 772CH against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
33,120
lb
Max Power
210
hp
Moldboard Width
12
ft
Overall Length
28.25
ft
Full Specifications
66 specs
Dimensions
Blade Base
8.76 in / 223 mm
Front Ground Clearance
1.93 ft / 0.59 m
Height To Top Of Isomount Cab
10.24 ft / 3.12 m
Overall Length
28.25 ft / 8.61 m
Tandem Axle Wheelbase
5.06 ft / 1.54 m
Wheelbase
19.59 ft / 5.97 m
Width Over Tires
8.24 ft / 2.51 m
Engine
6081H
1
Alternator Supplied Amperage
55 A
Articulation Angle
25 deg
Blade Pull At Max Weight
43,860 lb / 19,895 kg
Circle Gearbox Fluid Capacity
1.10 gal / 4.2 L
Cooling System Fluid Capacity
12 gal / 45.4 L
Displacement
494 cu in / 8.1 L
Engine Make
2240
Engine Model
6081H
Fuel Capacity
106 gal / 401.3 L
Ground Clearance
2 ft / 0.61 m
Hydraulic System Fluid Capacity
15.60 gal / 59.1 L
Max Operation Weight - Front Axle
11,330 lb / 5,139 kg
Max Operation Weight - Rear Axle
26,520 lb / 12,029 kg
Max Operation Weight - Total
37,850 lb / 17,168 kg
Max Power
210 hp / 156.6 kW
Max Speed - Forward
25.80 mph / 41.5 km/h
Max Speed - Reverse
25.80 mph / 41.5 km/h
Moldboard Height
24 in / 610 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12 ft / 3.66 m
Net Power Gear 1-2
180 hp / 134.2 kW
Net Power Gear 4-6
200 hp / 149.1 kW
Net Power Gear 5-6
210 hp / 156.6 kW
Net Power Gears 7-8
210 hp / 156.6 kW
Net Torque Gears 1-2
625 lb-ft / 847 Nm
Net Torque Gears 3-4
735 lb-ft / 997 Nm
Net Torque Gears 5-6
756 lb-ft / 1,025 Nm
Net Torque Gears 7-8
756 lb-ft / 1,025 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
8
Number of Cylinders
6
Oil System Fluid Capacity
7.70 gal / 29.1 L
Operating Voltage
24 V
Oscillation - Total
32 deg
Power Measured @
1,900 rpm
Pump Flow
54.70 gal/min / 207.1 L/min
Rear Diff/Final Drive Fluid Capacity
9.50 gal / 36.0 L
Relief Valve Pressure
2,550 psi / 175.8 bar
Side Shift Left
26.90 in / 683 mm
Side Shift Right
26.90 in / 683 mm
Std Operation Weight - Front Axle
10,210 lb / 4,631 kg
Std Operation Weight - Rear Axle
22,910 lb / 10,392 kg
Std Operation Weight - Total
33,120 lb / 15,023 kg
Tandem Case Fluid Capacity (Each)
19.90 gal / 75.3 L
Tire Size
14 in / 356 mm
Torque Measured @
900 rpm
Transmission Fluid Capacity
10.10 gal / 38.2 L
Turning Radius
22 ft / 6.71 m
Wheel Lean
20 deg
Hydraulics
Blade Tip Angle - Front
49 deg
Blade Tip Angle - Rear
5 deg
Diameter
59.90 in / 1,521 mm
Max Lift Above Ground
18.60 in / 472 mm
Max Reach Outside Tires - Left
85.10 ft / 25.94 m
Max Reach Outside Tires - Right
83.10 ft / 25.33 m
Rotation
360 deg
Shift Left
31 in / 787 mm
Shift Right
28.60 in / 726 mm
Related Machines
Frequently Asked Questions
How does the John Deere Construction & Forestry John Deere 772CH compare to similar Motor Grader models? +
You can compare the John Deere Construction & Forestry John Deere 772CH side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.