Overview
The John Deere Construction & Forestry John Deere 772G is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 110.0 gal and hydraulic capacity of 16.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the John Deere Construction & Forestry John Deere 772G against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Overall Length
28.90
ft
Full Specifications
101 specs
Dimensions
Blade Base
8.44 in / 214 mm
Centerline Front Tire Width
10.40 ft / 3.17 m
Centerline Of Rear Dual Tire Width
8.70 ft / 2.65 m
Engine Guard Clearance
2 ft / 0.61 m
Front Canopy Height
13.70 ft / 4.18 m
Ground Clearance
1.60 ft / 0.49 m
Height - Top Of Rops
12.80 ft / 3.90 m
Inside Body Depth - Maximum
5.70 ft / 1.74 m
Inside Body Length
19 ft / 5.79 m
Inside Body Width
11.90 ft / 3.63 m
Loading Height - Empty
11.60 ft / 3.54 m
Operating Width
15.70 ft / 4.79 m
Outside Body Width
12.90 ft / 3.93 m
Overall Body Length
26.80 ft / 8.17 m
Overall Height - Body Raised
27.10 ft / 8.26 m
Overall Length
28.90 ft / 8.81 m
Overall Tire Width
12.90 ft / 3.93 m
Rear Axle - Clearance
1.90 ft / 0.58 m
Rear Axle - Tail
10 lb / 4 kg
Wheel Base
13 in / 330 mm
Wheelbase
20.21 ft / 6.16 m
Engine
10.4 mile/h
1
Body Power Down - High Idle
10
Bore
5.70 in / 145 mm
Brake Surface - Front
216
Brake Surface - Rear
7,794
Def Tank
6 gal / 22.7 L
Differential Ratio
2.74
Displacement
1,105 cu in / 18.1 L
Engine Make
2240
Engine Model
PowerTech PSS 9.0L
Engine Power - Iso 14396
598 hp / 445.9 kW
Forward - 1
8 mph / 12.9 km/h
Forward - 2
10.90 mph / 17.5 km/h
Forward - 3
14.80 mph / 23.8 km/h
Forward - 4
19.80 mph / 31.9 km/h
Forward - 5
26.90 mph / 43.3 km/h
Forward - 6
36.20 mph / 58.3 km/h
Forward - 7
49.20 mph / 79.2 km/h
Front Axle - Empty
51 lb / 23 kg
Front Axle - Loaded
34 lb / 16 kg
Fuel Capacity
110 gal / 416.4 L
Fuel Tank
140 gal / 530.0 L
Gross Power - Sae J1995
605 hp / 451.1 kW
Hydraulic System Fluid Capacity
16 gal / 60.6 L
Max Operation Weight - Total
44,571 lb / 20,217 kg
Max Speed - Forward
28.30 mph / 45.5 km/h
Max Speed - Reverse
28.30 mph / 45.5 km/h
Net Power - Iso 9249
550 hp / 410.1 kW
Net Power - Sae J1349
550 hp / 410.1 kW
Net Torque - Sae J1349
2,221 lb-ft / 3,011 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
8
Number of Cylinders
6
Planetary Ratio
4.80
Pump Flow
56.10 gal/min / 212.4 L/min
Pump Flow - High Idle
118 gal/min / 446.7 L/min
Rated Engine Speed
1,700 rpm
Rear Axle - Empty
49 lb / 22 kg
Rear Axle - Loaded
66 lb / 30 kg
Relief Valve Pressure
2,750 psi / 189.6 bar
Relief Valve Setting - Lower
500 psi / 34.5 bar
Relief Valve Setting - Raise
2,750 psi / 189.6 bar
Reverse
10.40
Steering Standards
5,010
Stroke
7.20 in / 183 mm
Tire Size
14 in / 356 mm
Total Reduction Ratio
13.14
Turning Circle - Clearance Diameter
66.60 ft / 20.30 m
Hydraulics
Brake Standards
3,450
Rotation
360 deg
Other
Body Capacity - Sae 2:1
40.80
Dump Clearance
1.50 ft / 0.46 m
Maximum Payload Class (110%)
113,400 lb / 51,437 kg
Nominal Payload Class (100%)
103,200 lb / 46,811 kg
Not To Exceed Payload (120%)
123,800 lb / 56,155 kg
Sound
3
Steer Angle
31 deg
Target Payload Capacity
103,200 lb / 46,811 kg
Top Speed - Loaded
49 lb / 22 kg
Turning Diameter - Front
57.70 in / 1,466 mm
Body Weight
17,306 lb / 7,850 kg
Brake Hoist System
60
Brake/Hoist Hydraulic Tank
38 gal / 143.8 L
Chassis Weight
59,223 lb / 26,863 kg
Cooling System
33 gal / 124.9 L
Crankcase
17 gal / 64.4 L
Differential - Final Drives
47
Empty Loaded Cylinder Stroke Front
9.20 in / 234 mm
Empty Loaded Cylinder Stroke Rear
5.80 in / 147 mm
Fops Standards
3,449
Heaped 2:1 (Sae)
40.80
Rear Axle - Oscillation
9 lb / 4 kg
Rops Standards
3,471
Sound Standards (3)
74
Steering System - Including Tank
23 gal / 87.1 L
Steering Tank
14.50 gal / 54.9 L
Struck
31.30
Target Gross Machine Operating Weight
181,000 lb / 82,100 kg
Target Gross Machine Weight
181,000 lb / 82,100 kg
Torque Converter - Transmission System
17 lb-ft / 23 Nm
Related Machines
Frequently Asked Questions
How powerful is the John Deere Construction & Forestry John Deere 772G engine? +
The John Deere Construction & Forestry John Deere 772G produces 605 hp (451.1 kW) of engine power. This output is typical for its weight class and designed to handle demanding Motor Grader work cycles efficiently.
How does the John Deere Construction & Forestry John Deere 772G compare to similar Motor Grader models? +
You can compare the John Deere Construction & Forestry John Deere 772G side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.