Overview
The John Deere Construction & Forestry John Deere 870D is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 106.0 gal and hydraulic capacity of 14.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the John Deere Construction & Forestry John Deere 870D against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
34,750
lb
Max Power
235
hp
Moldboard Width
14.20
ft
Overall Length
28.89
ft
Full Specifications
64 specs
Dimensions
Blade Base
8.32 in / 211 mm
Front Ground Clearance
2.10 ft / 0.64 m
Height To Top Of Isomount Cab
10.44 ft / 3.18 m
Overall Length
28.89 ft / 8.81 m
Tandem Axle Wheelbase
5.06 ft / 1.54 m
Wheelbase
20.08 ft / 6.12 m
Width Over Tires
8.24 ft / 2.51 m
Engine
6081H
1
Alternator Supplied Amperage
100 A
Articulation Angle
22 deg
Blade Pull At Max Weight
29,319 lb / 13,299 kg
Circle Gearbox Fluid Capacity
1.50 gal / 5.7 L
Cooling System Fluid Capacity
13 gal / 49.2 L
Displacement
494 cu in / 8.1 L
Engine Make
2240
Engine Model
6081H
Fuel Capacity
106 gal / 401.3 L
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
14 gal / 53.0 L
Max Operation Weight - Front Axle
16,023 lb / 7,268 kg
Max Operation Weight - Rear Axle
32,576 lb / 14,776 kg
Max Operation Weight - Total
48,620 lb / 22,054 kg
Max Power
235 hp / 175.2 kW
Max Speed - Forward
25.60 mph / 41.2 km/h
Max Speed - Reverse
25.60 mph / 41.2 km/h
Moldboard Height
27.10 in / 688 mm
Moldboard Thickness
1 in / 25 mm
Moldboard Width
14.20 ft / 4.33 m
Net Power Gear 1-2
180 hp / 134.2 kW
Net Power Gear 4-6
185 hp / 138.0 kW
Net Power Gear 5-6
200 hp / 149.1 kW
Net Power Gears 7-8
235 hp / 175.2 kW
Net Torque Gears 1-2
731 lb-ft / 991 Nm
Net Torque Gears 3-4
793 lb-ft / 1,075 Nm
Net Torque Gears 5-6
835 lb-ft / 1,132 Nm
Net Torque Gears 7-8
913 lb-ft / 1,238 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
8
Number of Cylinders
6
Operating Voltage
24 V
Oscillation - Total
32 deg
Power Measured @
2,000 rpm
Pump Flow
54.70 gal/min / 207.1 L/min
Rear Diff/Final Drive Fluid Capacity
9.50 gal / 36.0 L
Relief Valve Pressure
2,750 psi / 189.6 bar
Side Shift Left
26.80 in / 681 mm
Side Shift Right
26.80 in / 681 mm
Std Operation Weight - Front Axle
9,200 lb / 4,173 kg
Std Operation Weight - Rear Axle
25,550 lb / 11,589 kg
Std Operation Weight - Total
34,750 lb / 15,762 kg
Tandem Case Fluid Capacity (Each)
20 gal / 75.7 L
Torque Measured @
1,000 rpm
Transmission Fluid Capacity
6 gal / 22.7 L
Turning Radius
23 ft / 7.01 m
Wheel Lean
20 deg
Hydraulics
Blade Tip Angle - Front
42 deg
Blade Tip Angle - Rear
5 deg
Diameter
60 in / 1,524 mm
Max Lift Above Ground
17.30 in / 439 mm
Max Reach Outside Tires - Left
91.40 ft / 27.86 m
Max Reach Outside Tires - Right
91 ft / 27.74 m
Rotation
360 deg
Shift Left
31 in / 787 mm
Shift Right
28.60 in / 726 mm
Related Machines
Frequently Asked Questions
How does the John Deere Construction & Forestry John Deere 870D compare to similar Motor Grader models? +
You can compare the John Deere Construction & Forestry John Deere 870D side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.