Overview
The John Deere Construction & Forestry John Deere 872D is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 106.0 gal and hydraulic capacity of 14.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the John Deere Construction & Forestry John Deere 872D against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
36,210
lb
Max Power
245
hp
Moldboard Width
14.20
ft
Overall Length
28.89
ft
Full Specifications
64 specs
Dimensions
Blade Base
8.32 in / 211 mm
Front Ground Clearance
1.93 ft / 0.59 m
Height To Top Of Isomount Cab
10.44 ft / 3.18 m
Overall Length
28.89 ft / 8.81 m
Tandem Axle Wheelbase
5.06 ft / 1.54 m
Wheelbase
20.08 ft / 6.12 m
Width Over Tires
8.67 ft / 2.64 m
Engine
6081H
1
Alternator Supplied Amperage
100 A
Articulation Angle
22 deg
Blade Pull At Max Weight
43,760 lb / 19,849 kg
Circle Gearbox Fluid Capacity
1.50 gal / 5.7 L
Cooling System Fluid Capacity
13 gal / 49.2 L
Displacement
494 cu in / 8.1 L
Engine Make
2240
Engine Model
6081H
Fuel Capacity
106 gal / 401.3 L
Ground Clearance
2 ft / 0.61 m
Hydraulic System Fluid Capacity
14 gal / 53.0 L
Max Operation Weight - Front Axle
16,023 lb / 7,268 kg
Max Operation Weight - Rear Axle
32,578 lb / 14,777 kg
Max Operation Weight - Total
48,601 lb / 22,045 kg
Max Power
245 hp / 182.7 kW
Max Speed - Forward
25.60 mph / 41.2 km/h
Max Speed - Reverse
25.60 mph / 41.2 km/h
Moldboard Height
27.10 in / 688 mm
Moldboard Thickness
1 in / 25 mm
Moldboard Width
14.20 ft / 4.33 m
Net Power Gear 1-2
205 hp / 152.9 kW
Net Power Gear 4-6
230 hp / 171.5 kW
Net Power Gear 5-6
245 hp / 182.7 kW
Net Power Gears 7-8
235 hp / 175.2 kW
Net Torque Gears 1-2
793 lb-ft / 1,075 Nm
Net Torque Gears 3-4
835 lb-ft / 1,132 Nm
Net Torque Gears 5-6
872 lb-ft / 1,182 Nm
Net Torque Gears 7-8
942 lb-ft / 1,277 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
8
Number of Cylinders
6
Operating Voltage
24 V
Oscillation - Total
32 deg
Power Measured @
2,000 rpm
Pump Flow
54.70 gal/min / 207.1 L/min
Rear Diff/Final Drive Fluid Capacity
9.50 gal / 36.0 L
Relief Valve Pressure
2,750 psi / 189.6 bar
Side Shift Left
26.80 in / 681 mm
Side Shift Right
26.80 in / 681 mm
Std Operation Weight - Front Axle
10,170 lb / 4,613 kg
Std Operation Weight - Rear Axle
26,040 lb / 11,812 kg
Std Operation Weight - Total
36,210 lb / 16,425 kg
Tandem Case Fluid Capacity (Each)
20 gal / 75.7 L
Torque Measured @
1,000 rpm
Transmission Fluid Capacity
6 gal / 22.7 L
Turning Radius
23.50 ft / 7.16 m
Wheel Lean
20 deg
Hydraulics
Blade Tip Angle - Front
42 deg
Blade Tip Angle - Rear
5 deg
Diameter
59.90 in / 1,521 mm
Max Lift Above Ground
17.30 in / 439 mm
Max Reach Outside Tires - Left
91.40 ft / 27.86 m
Max Reach Outside Tires - Right
91 ft / 27.74 m
Rotation
360 deg
Shift Left
31 in / 787 mm
Shift Right
28.60 in / 726 mm
Related Machines
Frequently Asked Questions
How does the John Deere Construction & Forestry John Deere 872D compare to similar Motor Grader models? +
You can compare the John Deere Construction & Forestry John Deere 872D side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.