Overview
The Komatsu GD675-5 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 109.9 gal and hydraulic capacity of 18.3 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Komatsu GD675-5 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
35,174.80
lb
Moldboard Width
14.20
ft
Overall Length
34.70
ft
Full Specifications
57 specs
Dimensions
Blade Base
8.47 in / 215 mm
Height To Top Of Isomount Cab
10.50 ft / 3.20 m
Overall Length
34.70 ft / 10.58 m
Tandem Axle Wheelbase
5.01 ft / 1.53 m
Wheelbase
21.26 ft / 6.48 m
Width Over Tires
8.63 ft / 2.63 m
Engine
Alternator Supplied Amperage
60 A
Articulation Angle
25 deg
Bore
4.30 in / 109 mm
Circle Gearbox Fluid Capacity
1.90 gal / 7.2 L
Cooling System Fluid Capacity
7.80 gal / 29.5 L
Engine Model
SAA6D107E-1
Fuel Capacity
109.90 gal / 416.0 L
Gross Power Gear 1-3
136 hp / 101.4 kW
Gross Power Gear 4-6
151 hp / 112.6 kW
Gross Power Gear 7-8
165 hp / 123.0 kW
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
18.30 gal / 69.3 L
Max Depth Of Cut
24.30 ft / 7.41 m
Max Speed - Forward
27.50 mph / 44.3 km/h
Max Speed - Reverse
25 mph / 40.2 km/h
Moldboard Height
25.40 in / 645 mm
Moldboard Thickness
0.80 in / 20 mm
Moldboard Width
14.20 ft / 4.33 m
Net Power Gear 1-3
134 hp / 99.9 kW
Net Power Gear 4-6
149 hp / 111.1 kW
Net Power Gears 7-8
163 hp / 121.5 kW
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Operating Voltage
24 V
Oscillation - Total
32 deg
Power Measured @
2,000 rpm
Pump Flow
52.90 gal/min / 200.2 L/min
Rear Diff/Final Drive Fluid Capacity
4.50 gal / 17.0 L
Relief Valve Pressure
435 psi / 30.0 bar
Side Shift Left
44.30 in / 1,125 mm
Side Shift Right
44.30 in / 1,125 mm
Std Operation Weight - Front Axle
9,645 lb / 4,375 kg
Std Operation Weight - Rear Axle
25,530 lb / 11,580 kg
Std Operation Weight - Total
35,175 lb / 15,955 kg
Stroke
4.90 in / 124 mm
Tandem Case Fluid Capacity (Each)
15.10 gal / 57.2 L
Torque
694 lb-ft / 941 Nm
Torque Measured @
1,450 rpm
Transmission Fluid Capacity
11.90 gal / 45.0 L
Turning Radius
24.30 ft / 7.41 m
Wheel Lean
16 deg
Hydraulics
Blade Tip Angle - Front
40 deg
Blade Tip Angle - Rear
5 deg
Diameter
60.30 in / 1,532 mm
Max Lift Above Ground
18.90 in / 480 mm
Max Reach Outside Tires - Left
98.50 ft / 30.02 m
Max Reach Outside Tires - Right
98.50 ft / 30.02 m
Rotation
360 deg
Shift Left
23.30 in / 592 mm
Shift Right
23.30 in / 592 mm
Related Machines
Frequently Asked Questions
How does the Komatsu GD675-5 compare to similar Motor Grader models? +
You can compare the Komatsu GD675-5 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.