Overview
The Link-Belt HTC-86110 is a hydraulic truck crane listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 450 hp, fuel capacity of 95.0 gal and hydraulic capacity of 144.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Link-Belt HTC-86110 against similar hydraulic truck crane models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Gross Power
450
hp
Full Specifications
24 specs
Dimensions
173 ft in
86,100
Carrier Length
39.70 ft / 12.10 m
Gross Power
450 hp / 335.6 kW
Ground Clearance
8.44 ft / 2.57 m
Max Elevating Angle
80 deg
Max Height @ Max Raise Angle - No Jib
173 in / 4,394 mm
Min Height @ Max Raise Angle
99 in / 2,515 mm
Model
ISX12
Number Of Sections
6
Transport Height
11.46 ft / 3.49 m
Transport Length
45.97 in / 1,168 mm
Transport Width
10.01 ft / 3.05 m
Wheelbase
23.50 ft / 7.16 m
Width W/ Outriggers Extended
26.25 ft / 8.00 m
Engine
Def Tank Capacity
10 gal / 37.9 L
Displacement
729 cu in / 11.9 L
Fuel Capacity
95 gal / 359.6 L
Hydraulic Pump Flow Capacity
188 gal/min / 711.7 L/min
Hydraulic System Fluid Capacity
144 gal / 545.1 L
Max Torque
1,550 lb-ft / 2,102 Nm
Number of Forward Gears
12
Number of Reverse Gears
2
Power Measured @
1,800 rpm
Torque Measured @
1,200 rpm
Frequently Asked Questions
How powerful is the Link-Belt HTC-86110 engine? +
The Link-Belt HTC-86110 produces 450 hp (335.6 kW) of engine power. This output is typical for its weight class and designed to handle demanding Hydraulic Truck Crane work cycles efficiently.
How does the Link-Belt HTC-86110 compare to similar Hydraulic Truck Crane models? +
You can compare the Link-Belt HTC-86110 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.