Overview
The Mauldin MG618 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 40.0 gal and hydraulic capacity of 20.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Mauldin MG618 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
18,590
lb
Max Power
133
hp
Moldboard Width
10
ft
Overall Length
23
ft
Full Specifications
33 specs
Dimensions
Blade Base
6.79 in / 172 mm
Height To Top Of Isomount Cab
9.08 ft / 2.77 m
Overall Length
23 ft / 7.01 m
Tandem Axle Wheelbase
3.71 ft / 1.13 m
Wheelbase
16.50 ft / 5.03 m
Width Over Tires
7.41 ft / 2.26 m
Engine
Articulation Angle
32 deg
Displacement
247 cu in / 4.0 L
Engine Make
2349
Engine Model
2012
Fuel Capacity
40 gal / 151.4 L
Hydraulic System Fluid Capacity
20 gal / 75.7 L
Max Power
133 hp / 99.2 kW
Max Speed - Forward
17 mph / 27.4 km/h
Max Speed - Reverse
17 mph / 27.4 km/h
Moldboard Height
19 in / 483 mm
Moldboard Width
10 ft / 3.05 m
Net Torque Gears 1-2
363 lb-ft / 493 Nm
Number Of Gears - Forward
2
Number Of Gears - Reverse
2
Operating Voltage
12 V
Oscillation - Total
30 deg
Std Operation Weight - Front Axle
5,600 lb / 2,540 kg
Std Operation Weight - Rear Axle
12,990 lb / 5,892 kg
Std Operation Weight - Total
18,590 lb / 8,432 kg
Tire Size
15 in / 381 mm
Turning Radius
18 ft / 5.49 m
Wheel Lean
20 deg
Hydraulics
Blade Tip Angle - Front
45 deg
Blade Tip Angle - Rear
45 deg
Max Lift Above Ground
13.80 in / 351 mm
Max Reach Outside Tires - Left
36 ft / 10.97 m
Max Reach Outside Tires - Right
36 ft / 10.97 m
Related Machines
Frequently Asked Questions
How does the Mauldin MG618 compare to similar Motor Grader models? +
You can compare the Mauldin MG618 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.