Overview
The Mitsubishi MG130-E is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 30.4 gal and hydraulic capacity of 17.7 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Mitsubishi MG130-E against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
22,178.60
lb
Max Power
95
hp
Moldboard Width
10.20
ft
Overall Length
22.68
ft
Full Specifications
40 specs
Dimensions
Blade Base
7.01 in / 178 mm
Height To Top Of Isomount Cab
9.88 ft / 3.01 m
Overall Length
22.68 ft / 6.91 m
Wheelbase
16.08 ft / 4.90 m
Width Over Tires
7.03 ft / 2.14 m
Engine
Alternator Supplied Amperage
30 A
Articulation Angle
26 deg
Circle Gearbox Fluid Capacity
1 gal / 3.8 L
Displacement
259 cu in / 4.2 L
Engine Make
2251
Engine Model
SK4-T
Fuel Capacity
30.40 gal / 115.1 L
Ground Clearance
1.60 ft / 0.49 m
Hydraulic System Fluid Capacity
17.70 gal / 67.0 L
Max Power
95 hp / 70.8 kW
Max Speed - Forward
20.30 mph / 32.7 km/h
Max Speed - Reverse
20.70 mph / 33.3 km/h
Moldboard Height
24.10 in / 612 mm
Moldboard Thickness
0.80 in / 20 mm
Moldboard Width
10.20 ft / 3.11 m
Number Of Gears - Forward
6
Number Of Gears - Reverse
6
Number of Cylinders
4
Oil System Fluid Capacity
3.20 gal / 12.1 L
Operating Voltage
24 V
Oscillation - Total
30 deg
Power Measured @
2,300 rpm
Pump Flow
28.10 gal/min / 106.4 L/min
Relief Valve Pressure
3 psi / 0.2 bar
Std Operation Weight - Total
22,179 lb / 10,060 kg
Tandem Case Fluid Capacity (Each)
6.90 gal / 26.1 L
Tire Size
10 in / 254 mm
Transmission Fluid Capacity
6.10 gal / 23.1 L
Wheel Lean
20 deg
Hydraulics
Blade Tip Angle - Front
40 deg
Blade Tip Angle - Rear
5 deg
Max Lift Above Ground
15.80 in / 401 mm
Rotation
360 deg
Shift Left
57.90 in / 1,471 mm
Shift Right
48.50 in / 1,232 mm
Related Machines
Frequently Asked Questions
How does the Mitsubishi MG130-E compare to similar Motor Grader models? +
You can compare the Mitsubishi MG130-E side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.