Overview
The New Holland F140 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 89.9 gal and hydraulic capacity of 25.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the New Holland F140 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Moldboard Width
12.10
ft
Overall Length
27.96
ft
Full Specifications
51 specs
Dimensions
Blade Base
8.41 in / 214 mm
Height To Top Of Isomount Cab
10.96 ft / 3.34 m
Overall Length
27.96 ft / 8.52 m
Rear Ground Clearance
2.01 ft / 0.61 m
Tandem Axle Wheelbase
5.23 ft / 1.59 m
Wheelbase
20.41 ft / 6.22 m
Width Over Tires
8.24 ft / 2.51 m
Engine
12.1 ft in
845
Alternator Supplied Amperage
70 A
Articulation Angle
25 deg
Blade Down Pressure
19,039 lb / 8,636 kg
Circle Gearbox Fluid Capacity
0.80 gal / 3.0 L
Cooling System Fluid Capacity
10.60 gal / 40.1 L
Displacement
360 cu in / 5.9 L
Engine Make
2347
Engine Model
6BTA5.9 Tier 1
Fuel Capacity
89.90 gal / 340.3 L
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
25 gal / 94.6 L
Max Depth Of Cut
28.10 ft / 8.56 m
Max Operation Weight - Front Axle
8,173 lb / 3,707 kg
Max Operation Weight - Rear Axle
21,667 lb / 9,828 kg
Max Operation Weight - Total
29,840 lb / 13,535 kg
Max Speed - Forward
26.80 mph / 43.1 km/h
Max Speed - Reverse
17.80 mph / 28.6 km/h
Moldboard Height
24.50 in / 622 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12.10 ft / 3.69 m
Net Torque Gears 7-8
104 lb-ft / 141 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Oil System Fluid Capacity
3.80 gal / 14.4 L
Operating Voltage
24 V
Oscillation - Total
19 deg
Power Measured @
2,200 rpm
Pump Flow
50.80 gal/min / 192.3 L/min
Relief Valve Pressure
2,596 psi / 179.0 bar
Side Shift Left
21 in / 533 mm
Side Shift Right
27.10 in / 688 mm
Tandem Case Fluid Capacity (Each)
8 gal / 30.3 L
Transmission Fluid Capacity
6.70 gal / 25.4 L
Turning Radius
24 ft / 7.32 m
Wheel Lean
18 deg
Hydraulics
12 ft in
740
Blade Tip Angle - Front
40 deg
Blade Tip Angle - Rear
5 deg
Diameter
69.10 in / 1,755 mm
Max Lift Above Ground
17.50 in / 445 mm
Max Reach Outside Tires - Left
62.30 ft / 18.99 m
Max Reach Outside Tires - Right
68.60 ft / 20.91 m
Rotation
360 deg
Related Machines
Frequently Asked Questions
How does the New Holland F140 compare to similar Motor Grader models? +
You can compare the New Holland F140 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.