Overview
The New Holland F170 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 89.9 gal and hydraulic capacity of 25.1 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the New Holland F170 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Moldboard Width
13
ft
Overall Length
27.96
ft
Full Specifications
52 specs
Dimensions
Blade Base
8.41 in / 214 mm
Height To Top Of Isomount Cab
10.96 ft / 3.34 m
Overall Length
27.96 ft / 8.52 m
Rear Ground Clearance
2.01 ft / 0.61 m
Tandem Axle Wheelbase
5.23 ft / 1.59 m
Wheelbase
20.41 ft / 6.22 m
Width Over Tires
8.24 ft / 2.51 m
Engine
13 ft in
650
13.2 ft in
190
Alternator Supplied Amperage
70 A
Articulation Angle
25 deg
Blade Down Pressure
20,627 lb / 9,356 kg
Circle Gearbox Fluid Capacity
0.80 gal / 3.0 L
Cooling System Fluid Capacity
10.60 gal / 40.1 L
Displacement
507 cu in / 8.3 L
Engine Make
2347
Engine Model
6 CTAA 8.3 Tier 2
Fuel Capacity
89.90 gal / 340.3 L
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
25.10 gal / 95.0 L
Max Depth Of Cut
28.10 ft / 8.56 m
Max Operation Weight - Front Axle
9,370 lb / 4,250 kg
Max Operation Weight - Rear Axle
22,708 lb / 10,300 kg
Max Operation Weight - Total
32,077 lb / 14,550 kg
Max Speed - Forward
26.80 mph / 43.1 km/h
Max Speed - Reverse
17.80 mph / 28.6 km/h
Moldboard Height
26.50 in / 673 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
13 ft / 3.96 m
Net Torque Gears 7-8
170 lb-ft / 230 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Oil System Fluid Capacity
5.10 gal / 19.3 L
Operating Voltage
24 V
Oscillation - Total
19 deg
Power Measured @
2,200 rpm
Pump Flow
48.40 gal/min / 183.2 L/min
Relief Valve Pressure
2,596 psi / 179.0 bar
Side Shift Left
21 in / 533 mm
Side Shift Right
27.10 in / 688 mm
Tandem Case Fluid Capacity (Each)
7.70 gal / 29.1 L
Transmission Fluid Capacity
5.10 gal / 19.3 L
Turning Radius
24 ft / 7.32 m
Wheel Lean
18 deg
Hydraulics
Blade Tip Angle - Front
40 deg
Blade Tip Angle - Rear
5 deg
Diameter
69.10 in / 1,755 mm
Max Lift Above Ground
17.50 in / 445 mm
Max Reach Outside Tires - Left
68.40 ft / 20.85 m
Max Reach Outside Tires - Right
74.70 ft / 22.77 m
Rotation
360 deg
Related Machines
Frequently Asked Questions
How does the New Holland F170 compare to similar Motor Grader models? +
You can compare the New Holland F170 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.