Overview
The New Holland F200 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 90.1 gal and hydraulic capacity of 25.3 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the New Holland F200 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Moldboard Width
14
ft
Overall Length
28.07
ft
Full Specifications
53 specs
Dimensions
Blade Base
8.41 in / 214 mm
Height To Top Of Isomount Cab
10.96 ft / 3.34 m
Overall Length
28.07 ft / 8.56 m
Rear Ground Clearance
2.01 ft / 0.61 m
Tandem Axle Wheelbase
5.26 ft / 1.60 m
Wheelbase
20.41 ft / 6.22 m
Width Over Tires
8.70 ft / 2.65 m
Engine
Alternator Supplied Amperage
70 A
Articulation Angle
25 deg
Blade Down Pressure
23,997 lb / 10,885 kg
Circle Gearbox Fluid Capacity
0.80 gal / 3.0 L
Cooling System Fluid Capacity
10.60 gal / 40.1 L
Displacement
507 cu in / 8.3 L
Engine Make
2347
Engine Model
6 CTAA 8.3 Tier 2
Fuel Capacity
90.10 gal / 341.1 L
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
25.30 gal / 95.8 L
Max Depth Of Cut
28.10 ft / 8.56 m
Max Operation Weight - Front Axle
11,250 lb / 5,103 kg
Max Operation Weight - Rear Axle
26,780 lb / 12,147 kg
Max Operation Weight - Total
38,030 lb / 17,250 kg
Max Speed - Forward
26.80 mph / 43.1 km/h
Max Speed - Reverse
19.10 mph / 30.7 km/h
Moldboard Height
26.50 in / 673 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
14 ft / 4.27 m
Net Torque Gears 7-8
200 lb-ft / 271 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Oil System Fluid Capacity
5.10 gal / 19.3 L
Operating Voltage
24 V
Oscillation - Total
19 deg
Power Measured @
2,200 rpm
Pump Flow
49.20 gal/min / 186.2 L/min
Rear Diff/Final Drive Fluid Capacity
6.70 gal / 25.4 L
Relief Valve Pressure
2,596 psi / 179.0 bar
Side Shift Left
21 in / 533 mm
Side Shift Right
27.10 in / 688 mm
Tandem Case Fluid Capacity (Each)
6.10 gal / 23.1 L
Transmission Fluid Capacity
5.90 gal / 22.3 L
Turning Radius
24 ft / 7.32 m
Wheel Lean
18 deg
Hydraulics
14 ft in
870
14.2 ft in
780
Blade Tip Angle - Front
40 deg
Blade Tip Angle - Rear
5 deg
Diameter
69.10 in / 1,755 mm
Max Lift Above Ground
17.60 in / 447 mm
Max Reach Outside Tires - Left
77.90 ft / 23.74 m
Max Reach Outside Tires - Right
85.60 ft / 26.09 m
Rotation
360 deg
Related Machines
Frequently Asked Questions
How does the New Holland F200 compare to similar Motor Grader models? +
You can compare the New Holland F200 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.