Overview
The New Holland G140 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 90.0 gal and hydraulic capacity of 47.5 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the New Holland G140 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
29,918
lb
Max Power
160
hp
Moldboard Width
12
ft
Overall Length
27.96
ft
Full Specifications
52 specs
Dimensions
Blade Base
8.41 in / 214 mm
Front Ground Clearance
1.25 ft / 0.38 m
Height To Top Of Isomount Cab
10.31 ft / 3.14 m
Overall Length
27.96 ft / 8.52 m
Rear Ground Clearance
2.05 ft / 0.62 m
Tandem Axle Wheelbase
5.23 ft / 1.59 m
Wheelbase
20.41 ft / 6.22 m
Width Over Tires
8.24 ft / 2.51 m
Engine
Alternator Supplied Amperage
80 A
Articulation Angle
25 deg
Blade Down Pressure
14,788 lb / 6,708 kg
Circle Gearbox Fluid Capacity
0.80 gal / 3.0 L
Cooling System Fluid Capacity
10.50 gal / 39.7 L
Displacement
409 cu in / 6.7 L
Engine Make
2347
Engine Model
QSB 6.7L
Fuel Capacity
90 gal / 340.7 L
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
47.50 gal / 179.8 L
Max Power
160 hp / 119.3 kW
Max Speed - Forward
26.60 mph / 42.8 km/h
Max Speed - Reverse
17.70 mph / 28.5 km/h
Moldboard Height
24.50 in / 622 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12 ft / 3.66 m
Net Power Gears 7-8
160 hp / 119.3 kW
Net Torque Gears 7-8
550 lb-ft / 746 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Operating Voltage
24 V
Oscillation - Total
19 deg
Power Measured @
2,200 rpm
Pump Flow
49 gal/min / 185.5 L/min
Relief Valve Pressure
2,600 psi / 179.3 bar
Side Shift Left
21 in / 533 mm
Side Shift Right
28 in / 711 mm
Std Operation Weight - Front Axle
8,172 lb / 3,707 kg
Std Operation Weight - Rear Axle
21,746 lb / 9,864 kg
Std Operation Weight - Total
29,918 lb / 13,571 kg
Tandem Case Fluid Capacity (Each)
7.70 gal / 29.1 L
Torque Measured @
1,500 rpm
Transmission Fluid Capacity
4.70 gal / 17.8 L
Turning Radius
23,786.10 ft / 7,250.00 m
Wheel Lean
17.50 deg
Hydraulics
Blade Tip Angle - Front
5 deg
Blade Tip Angle - Rear
42 deg
Diameter
69.10 in / 1,755 mm
Max Lift Above Ground
17.60 in / 447 mm
Max Reach Outside Tires - Left
77.90 ft / 23.74 m
Max Reach Outside Tires - Right
85.60 ft / 26.09 m
Rotation
360 deg
Related Machines
Frequently Asked Questions
How does the New Holland G140 compare to similar Motor Grader models? +
You can compare the New Holland G140 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.