Overview
The New Holland P2085 - 40 ft is a air drill listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. The page includes structured technical data such as dimensions, operating information, drivetrain details, capacities, and performance-related specifications where available. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the New Holland P2085 - 40 ft against similar air drill models by power, weight, capacity, dimensions, speed, and other technical values.
Full Specifications
28 specs
Dimensions
Available Spacing
10
Number Of Row Units 10\" Spacing
48
Number Of Row Units 7.5\" Spacing
64
Road-To-Opener Clearance,
8.50 ft / 2.59 m
Split Rank Capability
20
Toolbar Width
40 in / 1,016 mm
Transport Height
13.80 ft / 4.21 m
Transport Width
18.50 ft / 5.64 m
Engine
Closing Wheel Variable Packing Pressure, Lbs
85 psi / 5.9 bar
Disks
18
Display System
11,783
Mounted Seed Tank Capacity, Bushels (L)
100 gal / 378.5 L
Operating Speed
8 mph / 12.9 km/h
Row Unit Travel From Level Surface Down
8.50
Row Unit Travel From Level Surface Up
11.50
Sectional Control
2
Standard In-Cab Down Pressure Control
1,400 psi / 96.5 bar
Weight 10 \" Spacing (Empty)
23,810 lb / 10,800 kg
Weight 7.5 \" Spacing (Empty)
26,456 lb / 12,000 kg
Wing Flex Down
10
Wing Flex Up
15
Wing Sections
3
Hydraulics
Hydraulic Requirements
30.20
Length With Rear Hitch (Pin To Pin)
38.60 ft / 11.77 m
Minimum Tractor Pto Hp Required 10 Spacing
195
Minimum Tractor Pto Hp Required 10 Spacing With Air Cart
260
Minimum Tractor Pto Hp Required 7.5 Spacing With Air Cart
325
Minimum Tractor Pto Hp Required 7.5\" Spacing
260
Frequently Asked Questions
How does the New Holland P2085 - 40 ft compare to similar Air Drill models? +
You can compare the New Holland P2085 - 40 ft side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.