Overview
The New Holland RG200.B is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 90.1 gal and hydraulic capacity of 47.6 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the New Holland RG200.B against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
37,950.40
lb
Max Power
200
hp
Moldboard Width
12.10
ft
Overall Length
28.07
ft
Full Specifications
54 specs
Dimensions
Blade Base
8.41 in / 214 mm
Front Ground Clearance
2.01 ft / 0.61 m
Height To Top Of Isomount Cab
10.31 ft / 3.14 m
Overall Length
28.07 ft / 8.56 m
Rear Ground Clearance
1.25 ft / 0.38 m
Tandem Axle Wheelbase
5.26 ft / 1.60 m
Wheelbase
20.41 ft / 6.22 m
Width Over Tires
8.40 ft / 2.56 m
Engine
Alternator Supplied Amperage
100 A
Articulation Angle
25 deg
Blade Down Pressure
23,955 lb / 10,866 kg
Circle Gearbox Fluid Capacity
0.80 gal / 3.0 L
Cooling System Fluid Capacity
10.60 gal / 40.1 L
Displacement
507 cu in / 8.3 L
Engine Make
2347
Engine Model
6CT 8.3
Fuel Capacity
90.10 gal / 341.1 L
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
47.60 gal / 180.2 L
Max Depth Of Cut
28 ft / 8.53 m
Max Operation Weight - Front Axle
4,612 lb / 2,092 kg
Max Operation Weight - Rear Axle
26,725 lb / 12,122 kg
Max Operation Weight - Total
37,950 lb / 17,214 kg
Max Power
200 hp / 149.1 kW
Max Speed - Forward
26.80 mph / 43.1 km/h
Max Speed - Reverse
19.10 mph / 30.7 km/h
Moldboard Height
24.50 in / 622 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12.10 ft / 3.69 m
Net Power Gears 7-8
200 hp / 149.1 kW
Net Torque Gears 7-8
640 lb-ft / 868 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Operating Voltage
24 V
Oscillation - Total
19 deg
Pump Flow
49 gal/min / 185.5 L/min
Rear Diff/Final Drive Fluid Capacity
3.20 gal / 12.1 L
Relief Valve Pressure
2,800 psi / 193.1 bar
Std Operation Weight - Front Axle
11,226 lb / 5,092 kg
Std Operation Weight - Rear Axle
26,725 lb / 12,122 kg
Std Operation Weight - Total
37,950 lb / 17,214 kg
Tandem Case Fluid Capacity (Each)
6 gal / 22.7 L
Transmission Fluid Capacity
7.60 gal / 28.8 L
Turning Radius
23,914.10 ft / 7,289.02 m
Wheel Lean
17.50 deg
Hydraulics
Blade Tip Angle - Front
42 deg
Blade Tip Angle - Rear
90 deg
Diameter
69.10 in / 1,755 mm
Max Lift Above Ground
17.60 in / 447 mm
Max Reach Outside Tires - Left
77.90 ft / 23.74 m
Max Reach Outside Tires - Right
85.60 ft / 26.09 m
Rotation
360 deg
Shift Left
21 in / 533 mm
Shift Right
27.10 in / 688 mm
Related Machines
Frequently Asked Questions
How does the New Holland RG200.B compare to similar Motor Grader models? +
You can compare the New Holland RG200.B side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.