Overview
The Terex TG150 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 81.9 gal and hydraulic capacity of 39.7 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Terex TG150 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
31,967.10
lb
Max Power
163
hp
Moldboard Width
12.10
ft
Overall Length
30.85
ft
Full Specifications
47 specs
Dimensions
Blade Base
7.24 in / 184 mm
Front Ground Clearance
1.80 ft / 0.55 m
Height To Top Of Isomount Cab
10.75 ft / 3.28 m
Overall Length
30.85 ft / 9.40 m
Rear Ground Clearance
1.56 ft / 0.48 m
Tandem Axle Wheelbase
5.11 ft / 1.56 m
Wheelbase
18.63 ft / 5.68 m
Width Over Tires
7.94 ft / 2.42 m
Engine
Alternator Supplied Amperage
55 A
Articulation Angle
45 deg
Blade Pull At Max Weight
17,994 lb / 8,162 kg
Circle Gearbox Fluid Capacity
1.60 gal / 6.1 L
Cooling System Fluid Capacity
11.90 gal / 45.0 L
Displacement
366 cu in / 6.0 L
Engine Make
2347
Fuel Capacity
81.90 gal / 310.0 L
Ground Clearance
1.80 ft / 0.55 m
Hydraulic System Fluid Capacity
39.70 gal / 150.3 L
Max Power
163 hp / 121.5 kW
Max Speed - Forward
24.90 mph / 40.1 km/h
Max Speed - Reverse
15.60 mph / 25.1 km/h
Moldboard Height
22.90 in / 582 mm
Moldboard Thickness
0.80 in / 20 mm
Moldboard Width
12.10 ft / 3.69 m
Net Power Gear 5-6
163 hp / 121.5 kW
Number Of Gears - Forward
6
Number Of Gears - Reverse
3
Number of Cylinders
6
Operating Voltage
24 V
Oscillation - Total
15 deg
Power Measured @
2,200 rpm
Pump Flow
26.20 gal/min / 99.2 L/min
Rear Diff/Final Drive Fluid Capacity
4 gal / 15.1 L
Relief Valve Pressure
2,669 psi / 184.0 bar
Side Shift Left
49.30 in / 1,252 mm
Side Shift Right
49.30 in / 1,252 mm
Std Operation Weight - Front Axle
9,480 lb / 4,300 kg
Std Operation Weight - Rear Axle
22,487 lb / 10,200 kg
Std Operation Weight - Total
31,967 lb / 14,500 kg
Tandem Case Fluid Capacity (Each)
10.60 gal / 40.1 L
Transmission Fluid Capacity
4.80 gal / 18.2 L
Turning Radius
22.70 ft / 6.92 m
Wheel Lean
17 deg
Hydraulics
Diameter
53.10 in / 1,349 mm
Max Lift Above Ground
18.90 in / 480 mm
Max Reach Outside Tires - Left
98.50 ft / 30.02 m
Max Reach Outside Tires - Right
125.20 ft / 38.16 m
Related Machines
Frequently Asked Questions
How does the Terex TG150 compare to similar Motor Grader models? +
You can compare the Terex TG150 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.