Overview
The Terex TG150TA-3 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 81.9 gal and hydraulic capacity of 100.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Terex TG150TA-3 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
31,967
lb
Max Power
163
hp
Moldboard Width
12
ft
Overall Length
30.83
ft
Full Specifications
43 specs
Dimensions
Blade Base
7.17 in / 182 mm
Front Ground Clearance
18.61 ft / 5.67 m
Height To Top Of Isomount Cab
10.75 ft / 3.28 m
Overall Length
30.83 ft / 9.40 m
Rear Ground Clearance
18.61 ft / 5.67 m
Tandem Axle Wheelbase
5.08 ft / 1.55 m
Wheelbase
19.43 ft / 5.92 m
Width Over Tires
7.83 ft / 2.39 m
Engine
Alternator Supplied Amperage
55 A
Articulation Angle
45 deg
Blade Pull At Max Weight
25,681 lb / 11,649 kg
Circle Gearbox Fluid Capacity
1.60 gal / 6.1 L
Cooling System Fluid Capacity
11.90 gal / 45.0 L
Displacement
366 cu in / 6.0 L
Engine Make
2347
Fuel Capacity
81.90 gal / 310.0 L
Ground Clearance
21.50 ft / 6.55 m
Hydraulic System Fluid Capacity
100 gal / 378.5 L
Max Power
163 hp / 121.5 kW
Max Speed - Forward
24.90 mph / 40.1 km/h
Max Speed - Reverse
15.50 mph / 24.9 km/h
Moldboard Height
18.90 in / 480 mm
Moldboard Thickness
0.80 in / 20 mm
Moldboard Width
12 ft / 3.66 m
Net Power Gear 5-6
163 hp / 121.5 kW
Number Of Gears - Forward
6
Number Of Gears - Reverse
3
Operating Voltage
24 V
Oscillation - Total
15 deg
Pump Flow
26.10 gal/min / 98.8 L/min
Rear Diff/Final Drive Fluid Capacity
3.90 gal / 14.8 L
Relief Valve Pressure
2,669 psi / 184.0 bar
Side Shift Left
4.10 in / 104 mm
Side Shift Right
4.10 in / 104 mm
Std Operation Weight - Front Axle
9,480 lb / 4,300 kg
Std Operation Weight - Rear Axle
22,487 lb / 10,200 kg
Std Operation Weight - Total
31,967 lb / 14,500 kg
Tandem Case Fluid Capacity (Each)
5.30 gal / 20.1 L
Transmission Fluid Capacity
4.80 gal / 18.2 L
Turning Radius
22.60 ft / 6.89 m
Wheel Lean
17 deg
Hydraulics
Diameter
4.50 in / 114 mm
Max Lift Above Ground
18.90 in / 480 mm
Related Machines
Frequently Asked Questions
How does the Terex TG150TA-3 compare to similar Motor Grader models? +
You can compare the Terex TG150TA-3 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.