Overview
The Terex TG190 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 126.9 gal and hydraulic capacity of 45.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Terex TG190 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
41,226.50
lb
Max Power
185
hp
Moldboard Width
12.10
ft
Overall Length
33.69
ft
Full Specifications
46 specs
Dimensions
Blade Base
8.66 in / 220 mm
Front Ground Clearance
1.94 ft / 0.59 m
Height To Top Of Isomount Cab
10.83 ft / 3.30 m
Overall Length
33.69 ft / 10.27 m
Rear Ground Clearance
1.56 ft / 0.48 m
Tandem Axle Wheelbase
5.06 ft / 1.54 m
Wheelbase
20.14 ft / 6.14 m
Width Over Tires
8.17 ft / 2.49 m
Engine
Alternator Supplied Amperage
55 A
Articulation Angle
45 deg
Blade Pull At Max Weight
21,683 lb / 9,835 kg
Circle Gearbox Fluid Capacity
1.60 gal / 6.1 L
Cooling System Fluid Capacity
11.10 gal / 42.0 L
Displacement
366 cu in / 6.0 L
Engine Make
2347
Fuel Capacity
126.90 gal / 480.4 L
Ground Clearance
2 ft / 0.61 m
Hydraulic System Fluid Capacity
45 gal / 170.3 L
Max Power
185 hp / 138.0 kW
Max Speed - Forward
24.90 mph / 40.1 km/h
Max Speed - Reverse
12.10 mph / 19.5 km/h
Moldboard Height
24.90 in / 632 mm
Moldboard Thickness
0.80 in / 20 mm
Moldboard Width
12.10 ft / 3.69 m
Net Power Gear 5-6
185 hp / 138.0 kW
Number Of Gears - Forward
6
Number Of Gears - Reverse
3
Number of Cylinders
6
Operating Voltage
24 V
Oscillation - Total
15 deg
Power Measured @
2,000 rpm
Pump Flow
26.10 gal/min / 98.8 L/min
Relief Valve Pressure
2,669 psi / 184.0 bar
Side Shift Left
49.30 in / 1,252 mm
Side Shift Right
49.30 in / 1,252 mm
Std Operation Weight - Front Axle
11,023 lb / 5,000 kg
Std Operation Weight - Rear Axle
30,203 lb / 13,700 kg
Std Operation Weight - Total
41,227 lb / 18,700 kg
Tandem Case Fluid Capacity (Each)
11.10 gal / 42.0 L
Transmission Fluid Capacity
9 gal / 34.1 L
Turning Radius
24.70 ft / 7.53 m
Wheel Lean
17 deg
Hydraulics
Diameter
59.50 in / 1,511 mm
Max Lift Above Ground
18.60 in / 472 mm
Max Reach Outside Tires - Left
87.50 ft / 26.67 m
Max Reach Outside Tires - Right
125.20 ft / 38.16 m
Related Machines
Frequently Asked Questions
How does the Terex TG190 compare to similar Motor Grader models? +
You can compare the Terex TG190 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.