Overview
The Terex TG190TA-3 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 126.8 gal and hydraulic capacity of 44.9 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Terex TG190TA-3 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
41,266
lb
Max Power
176
hp
Moldboard Width
12
ft
Overall Length
33.67
ft
Full Specifications
38 specs
Dimensions
Front Ground Clearance
18.61 ft / 5.67 m
Height To Top Of Isomount Cab
10.83 ft / 3.30 m
Overall Length
33.67 ft / 10.26 m
Rear Ground Clearance
18.61 ft / 5.67 m
Tandem Axle Wheelbase
5.08 ft / 1.55 m
Wheelbase
20.08 ft / 6.12 m
Width Over Tires
8.08 ft / 2.46 m
Engine
Alternator Supplied Amperage
55 A
Blade Pull At Max Weight
31,264 lb / 14,181 kg
Circle Gearbox Fluid Capacity
1.60 gal / 6.1 L
Cooling System Fluid Capacity
11.90 gal / 45.0 L
Displacement
366 cu in / 6.0 L
Engine Make
2347
Fuel Capacity
126.80 gal / 480.0 L
Ground Clearance
23.30 ft / 7.10 m
Hydraulic System Fluid Capacity
44.90 gal / 170.0 L
Max Power
176 hp / 131.2 kW
Max Speed - Forward
24.90 mph / 40.1 km/h
Max Speed - Reverse
12 mph / 19.3 km/h
Moldboard Height
24.80 in / 630 mm
Moldboard Thickness
0.80 in / 20 mm
Moldboard Width
12 ft / 3.66 m
Net Power Gear 5-6
176 hp / 131.2 kW
Number Of Gears - Forward
6
Number Of Gears - Reverse
3
Operating Voltage
24 V
Oscillation - Total
15 deg
Pump Flow
26.10 gal/min / 98.8 L/min
Rear Diff/Final Drive Fluid Capacity
4 gal / 15.1 L
Relief Valve Pressure
2,669 psi / 184.0 bar
Std Operation Weight - Front Axle
11,023 lb / 5,000 kg
Std Operation Weight - Rear Axle
30,203 lb / 13,700 kg
Std Operation Weight - Total
41,266 lb / 18,718 kg
Tandem Case Fluid Capacity (Each)
5.50 gal / 20.8 L
Transmission Fluid Capacity
9 gal / 34.1 L
Wheel Lean
17 deg
Hydraulics
Diameter
5 in / 127 mm
Max Lift Above Ground
4.30 in / 109 mm
Related Machines
Frequently Asked Questions
How does the Terex TG190TA-3 compare to similar Motor Grader models? +
You can compare the Terex TG190TA-3 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.