Overview
The Volvo Construction Equipment Volvo G710 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. The page includes structured technical data such as dimensions, operating information, drivetrain details, capacities, and performance-related specifications where available. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Volvo Construction Equipment Volvo G710 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
30,631.10
lb
Max Power
140
hp
Moldboard Width
12.10
ft
Overall Length
27.75
ft
Full Specifications
38 specs
Dimensions
Blade Base
8.59 in / 218 mm
Overall Length
27.75 ft / 8.46 m
Wheelbase
20 ft / 6.10 m
Width Over Tires
8.17 ft / 2.49 m
Engine
Articulation Angle
22 deg
Blade Down Pressure
16,494 lb / 7,482 kg
Blade Pull At Max Weight
19,109 lb / 8,668 kg
Displacement
360 cu in / 5.9 L
Engine Make
2347
Engine Model
6B5.9
Ground Clearance
2 ft / 0.61 m
Max Depth Of Cut
32.60 ft / 9.94 m
Max Power
140 hp / 104.4 kW
Max Speed - Forward
24.80 mph / 39.9 km/h
Max Speed - Reverse
17.80 mph / 28.6 km/h
Moldboard Height
25 in / 635 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12.10 ft / 3.69 m
Net Power Gears 7-8
140 hp / 104.4 kW
Net Torque Gears 7-8
440 lb-ft / 597 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Oscillation - Total
16 deg
Power Measured @
2,200 rpm
Pump Flow
50.50 gal/min / 191.2 L/min
Relief Valve Pressure
2,500 psi / 172.4 bar
Side Shift Left
30.50 in / 775 mm
Side Shift Right
30.50 in / 775 mm
Std Operation Weight - Front Axle
9,401 lb / 4,264 kg
Std Operation Weight - Rear Axle
21,231 lb / 9,630 kg
Std Operation Weight - Total
30,631 lb / 13,894 kg
Torque Measured @
1,600 rpm
Transmission Type
Volvo 8400
Turning Radius
25.50 ft / 7.77 m
Wheel Lean
18 deg
Hydraulics
Diameter
66.30 in / 1,684 mm
Rotation
360 deg
Related Machines
Frequently Asked Questions
How does the Volvo Construction Equipment Volvo G710 compare to similar Motor Grader models? +
You can compare the Volvo Construction Equipment Volvo G710 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.