Overview
The Volvo Construction Equipment Volvo G730 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 100.0 gal and hydraulic capacity of 23.8 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Volvo Construction Equipment Volvo G730 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
34,751.50
lb
Max Power
205
hp
Moldboard Width
12
ft
Overall Length
27.84
ft
Full Specifications
49 specs
Dimensions
Blade Base
8.51 in / 216 mm
Height To Top Of Isomount Cab
10.17 ft / 3.10 m
Overall Length
27.84 ft / 8.49 m
Wheelbase
20 ft / 6.10 m
Width Over Tires
8.34 ft / 2.54 m
Engine
Alternator Supplied Amperage
75 A
Articulation Angle
22 deg
Blade Down Pressure
18,426 lb / 8,358 kg
Blade Pull At Max Weight
21,736 lb / 9,859 kg
Cooling System Fluid Capacity
12.50 gal / 47.3 L
Displacement
505 cu in / 8.3 L
Engine Make
2347
Engine Model
6C8.3
Fuel Capacity
100 gal / 378.5 L
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
23.80 gal / 90.1 L
Max Depth Of Cut
32 ft / 9.75 m
Max Power
205 hp / 152.9 kW
Max Speed - Forward
28.50 mph / 45.9 km/h
Max Speed - Reverse
20.40 mph / 32.8 km/h
Moldboard Height
25 in / 635 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12 ft / 3.66 m
Net Power Gears 7-8
205 hp / 152.9 kW
Net Torque Gears 7-8
636 lb-ft / 862 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Operating Voltage
24 V
Oscillation - Total
16 deg
Pump Flow
50.50 gal/min / 191.2 L/min
Rear Diff/Final Drive Fluid Capacity
6.10 gal / 23.1 L
Relief Valve Pressure
2,500 psi / 172.4 bar
Side Shift Left
26.50 in / 673 mm
Side Shift Right
26.50 in / 673 mm
Std Operation Weight - Front Axle
10,596 lb / 4,806 kg
Std Operation Weight - Rear Axle
24,156 lb / 10,957 kg
Std Operation Weight - Total
34,752 lb / 15,763 kg
Tandem Case Fluid Capacity (Each)
26.50 gal / 100.3 L
Transmission Fluid Capacity
10.10 gal / 38.2 L
Wheel Lean
18 deg
Hydraulics
Blade Tip Angle - Front
44 deg
Blade Tip Angle - Rear
6.50 deg
Diameter
66.30 in / 1,684 mm
Max Lift Above Ground
17.50 in / 445 mm
Max Reach Outside Tires - Left
79.50 ft / 24.23 m
Max Reach Outside Tires - Right
79 ft / 24.08 m
Rotation
360 deg
Shift Left
30.50 in / 775 mm
Shift Right
29.50 in / 749 mm
Related Machines
Frequently Asked Questions
How does the Volvo Construction Equipment Volvo G730 compare to similar Motor Grader models? +
You can compare the Volvo Construction Equipment Volvo G730 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.