Overview
The Volvo Construction Equipment Volvo G730B is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 100.0 gal and hydraulic capacity of 35.4 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Volvo Construction Equipment Volvo G730B against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
35,501.10
lb
Max Power
228
hp
Moldboard Width
12
ft
Overall Length
29.92
ft
Full Specifications
52 specs
Dimensions
Blade Base
8.51 in / 216 mm
Height To Top Of Isomount Cab
10.17 ft / 3.10 m
Overall Length
29.92 ft / 9.12 m
Wheelbase
20 ft / 6.10 m
Width Over Tires
8.34 ft / 2.54 m
Engine
Alternator Supplied Amperage
80 A
Articulation Angle
22 deg
Blade Down Pressure
17,904 lb / 8,121 kg
Blade Pull At Max Weight
22,685 lb / 10,290 kg
Cooling System Fluid Capacity
7.40 gal / 28.0 L
Displacement
436 cu in / 7.1 L
Engine Make
2244
Engine Model
D7DGCE2
Fuel Capacity
100 gal / 378.5 L
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
35.40 gal / 134.0 L
Max Depth Of Cut
32 ft / 9.75 m
Max Power
228 hp / 170.0 kW
Max Speed - Forward
28.50 mph / 45.9 km/h
Max Speed - Reverse
20.40 mph / 32.8 km/h
Moldboard Height
25 in / 635 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12 ft / 3.66 m
Net Power Gears 7-8
228 hp / 170.0 kW
Net Torque Gears 7-8
774 lb-ft / 1,049 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Operating Voltage
24 V
Oscillation - Total
16 deg
Power Measured @
2,200 rpm
Pump Flow
75.10 gal/min / 284.3 L/min
Rear Diff/Final Drive Fluid Capacity
6.10 gal / 23.1 L
Relief Valve Pressure
2,700 psi / 186.2 bar
Side Shift Left
26.50 in / 673 mm
Side Shift Right
26.50 in / 673 mm
Std Operation Weight - Front Axle
10,296 lb / 4,670 kg
Std Operation Weight - Rear Axle
25,206 lb / 11,433 kg
Std Operation Weight - Total
35,501 lb / 16,103 kg
Tandem Case Fluid Capacity (Each)
26.50 gal / 100.3 L
Torque Measured @
1,400 rpm
Transmission Fluid Capacity
10.10 gal / 38.2 L
Wheel Lean
18 deg
Hydraulics
Blade Tip Angle - Front
44 deg
Blade Tip Angle - Rear
6.50 deg
Diameter
66.30 in / 1,684 mm
Max Lift Above Ground
17.50 in / 445 mm
Max Reach Outside Tires - Left
79.50 ft / 24.23 m
Max Reach Outside Tires - Right
79 ft / 24.08 m
Rotation
360 deg
Shift Left
30.50 in / 775 mm
Shift Right
29.50 in / 749 mm
Related Machines
Frequently Asked Questions
How does the Volvo Construction Equipment Volvo G730B compare to similar Motor Grader models? +
You can compare the Volvo Construction Equipment Volvo G730B side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.