Overview
The Volvo Construction Equipment Volvo G740 VHP is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 100.0 gal and hydraulic capacity of 23.8 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Volvo Construction Equipment Volvo G740 VHP against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
35,611.30
lb
Max Power
235
hp
Moldboard Width
15
ft
Overall Length
28.34
ft
Full Specifications
51 specs
Dimensions
Blade Base
8.92 in / 227 mm
Height To Top Of Isomount Cab
10.17 ft / 3.10 m
Overall Length
28.34 ft / 8.64 m
Wheelbase
20.50 ft / 6.25 m
Width Over Tires
8.34 ft / 2.54 m
Engine
Alternator Supplied Amperage
75 A
Articulation Angle
22 deg
Blade Down Pressure
18,904 lb / 8,575 kg
Blade Pull At Max Weight
22,424 lb / 10,171 kg
Cooling System Fluid Capacity
13.30 gal / 50.3 L
Displacement
659 cu in / 10.8 L
Engine Make
2347
Engine Model
M11
Fuel Capacity
100 gal / 378.5 L
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
23.80 gal / 90.1 L
Max Depth Of Cut
31.50 ft / 9.60 m
Max Power
235 hp / 175.2 kW
Max Speed - Forward
27.20 mph / 43.8 km/h
Max Speed - Reverse
19.50 mph / 31.4 km/h
Moldboard Height
29 in / 737 mm
Moldboard Thickness
1 in / 25 mm
Moldboard Width
15 ft / 4.57 m
Net Power Gears 7-8
235 hp / 175.2 kW
Net Torque Gears 7-8
845 lb-ft / 1,146 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Operating Voltage
24 V
Oscillation - Total
16 deg
Power Measured @
2,100 rpm
Pump Flow
48.40 gal/min / 183.2 L/min
Rear Diff/Final Drive Fluid Capacity
6.10 gal / 23.1 L
Relief Valve Pressure
2,500 psi / 172.4 bar
Side Shift Left
26.50 in / 673 mm
Side Shift Right
26.50 in / 673 mm
Std Operation Weight - Front Axle
10,695 lb / 4,851 kg
Std Operation Weight - Rear Axle
24,917 lb / 11,302 kg
Std Operation Weight - Total
35,611 lb / 16,153 kg
Tandem Case Fluid Capacity (Each)
26.50 gal / 100.3 L
Torque Measured @
1,300 rpm
Transmission Fluid Capacity
10.10 gal / 38.2 L
Wheel Lean
18 deg
Hydraulics
Blade Tip Angle - Front
44 deg
Blade Tip Angle - Rear
2.50 deg
Diameter
66.30 in / 1,684 mm
Max Lift Above Ground
17.20 in / 437 mm
Max Reach Outside Tires - Left
79.50 ft / 24.23 m
Max Reach Outside Tires - Right
79 ft / 24.08 m
Rotation
360 deg
Shift Left
30.50 in / 775 mm
Shift Right
29.50 in / 749 mm
Related Machines
Frequently Asked Questions
How does the Volvo Construction Equipment Volvo G740 VHP compare to similar Motor Grader models? +
You can compare the Volvo Construction Equipment Volvo G740 VHP side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.