Overview
The Volvo Construction Equipment Volvo G740B is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 120.0 gal and hydraulic capacity of 35.4 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Volvo Construction Equipment Volvo G740B against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
37,125.90
lb
Max Power
243
hp
Moldboard Width
12
ft
Overall Length
30.25
ft
Full Specifications
52 specs
Dimensions
Blade Base
8.92 in / 227 mm
Height To Top Of Isomount Cab
10.17 ft / 3.10 m
Overall Length
30.25 ft / 9.22 m
Wheelbase
20.50 ft / 6.25 m
Width Over Tires
8.34 ft / 2.54 m
Engine
Alternator Supplied Amperage
75 A
Articulation Angle
22 deg
Blade Down Pressure
19,711 lb / 8,941 kg
Blade Pull At Max Weight
22,089 lb / 10,019 kg
Cooling System Fluid Capacity
13.30 gal / 50.3 L
Displacement
586 cu in / 9.6 L
Engine Make
2244
Engine Model
D10BGAE2
Fuel Capacity
120 gal / 454.2 L
Ground Clearance
2.10 ft / 0.64 m
Hydraulic System Fluid Capacity
35.40 gal / 134.0 L
Max Depth Of Cut
32 ft / 9.75 m
Max Power
243 hp / 181.2 kW
Max Speed - Forward
27.20 mph / 43.8 km/h
Max Speed - Reverse
19.50 mph / 31.4 km/h
Moldboard Height
29 in / 737 mm
Moldboard Thickness
1 in / 25 mm
Moldboard Width
12 ft / 3.66 m
Net Power Gears 7-8
243 hp / 181.2 kW
Net Torque Gears 7-8
846 lb-ft / 1,147 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Operating Voltage
24 V
Oscillation - Total
16 deg
Power Measured @
2,200 rpm
Pump Flow
75.10 gal/min / 284.3 L/min
Rear Diff/Final Drive Fluid Capacity
6.10 gal / 23.1 L
Relief Valve Pressure
2,700 psi / 186.2 bar
Side Shift Left
26.50 in / 673 mm
Side Shift Right
26.50 in / 673 mm
Std Operation Weight - Front Axle
11,138 lb / 5,052 kg
Std Operation Weight - Rear Axle
25,988 lb / 11,788 kg
Std Operation Weight - Total
37,126 lb / 16,840 kg
Tandem Case Fluid Capacity (Each)
26.50 gal / 100.3 L
Torque Measured @
1,100 rpm
Transmission Fluid Capacity
10.10 gal / 38.2 L
Wheel Lean
18 deg
Hydraulics
Blade Tip Angle - Front
44 deg
Blade Tip Angle - Rear
6.50 deg
Diameter
66.30 in / 1,684 mm
Max Lift Above Ground
17.20 in / 437 mm
Max Reach Outside Tires - Left
79.50 ft / 24.23 m
Max Reach Outside Tires - Right
79 ft / 24.08 m
Rotation
360 deg
Shift Left
30.50 in / 775 mm
Shift Right
29.50 in / 749 mm
Related Machines
Frequently Asked Questions
How does the Volvo Construction Equipment Volvo G740B compare to similar Motor Grader models? +
You can compare the Volvo Construction Equipment Volvo G740B side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.