Overview
The Volvo Construction Equipment Volvo G780 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 100.0 gal and hydraulic capacity of 23.8 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Volvo Construction Equipment Volvo G780 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
42,743.30
lb
Max Power
210
hp
Moldboard Width
14
ft
Overall Length
28.51
ft
Full Specifications
51 specs
Dimensions
Blade Base
8.92 in / 227 mm
Height To Top Of Isomount Cab
10.50 ft / 3.20 m
Overall Length
28.51 ft / 8.69 m
Wheelbase
20.50 ft / 6.25 m
Width Over Tires
9.17 ft / 2.80 m
Engine
Alternator Supplied Amperage
75 A
Articulation Angle
22 deg
Blade Down Pressure
23,485 lb / 10,653 kg
Blade Pull At Max Weight
26,507 lb / 12,023 kg
Cooling System Fluid Capacity
13.30 gal / 50.3 L
Displacement
659 cu in / 10.8 L
Engine Make
2347
Engine Model
M11
Fuel Capacity
100 gal / 378.5 L
Ground Clearance
2.30 ft / 0.70 m
Hydraulic System Fluid Capacity
23.80 gal / 90.1 L
Max Depth Of Cut
33 ft / 10.06 m
Max Power
210 hp / 156.6 kW
Max Speed - Forward
23.80 mph / 38.3 km/h
Max Speed - Reverse
17 mph / 27.4 km/h
Moldboard Height
31 in / 787 mm
Moldboard Thickness
1 in / 25 mm
Moldboard Width
14 ft / 4.27 m
Net Power Gears 7-8
210 hp / 156.6 kW
Net Torque Gears 7-8
760 lb-ft / 1,030 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Operating Voltage
24 V
Oscillation - Total
16 deg
Power Measured @
2,100 rpm
Pump Flow
48.40 gal/min / 183.2 L/min
Rear Diff/Final Drive Fluid Capacity
9 gal / 34.1 L
Relief Valve Pressure
2,500 psi / 172.4 bar
Side Shift Left
26.50 in / 673 mm
Side Shift Right
26.50 in / 673 mm
Std Operation Weight - Front Axle
13,290 lb / 6,028 kg
Std Operation Weight - Rear Axle
29,454 lb / 13,360 kg
Std Operation Weight - Total
42,743 lb / 19,388 kg
Tandem Case Fluid Capacity (Each)
27.80 gal / 105.2 L
Torque Measured @
1,300 rpm
Transmission Fluid Capacity
10.10 gal / 38.2 L
Wheel Lean
18 deg
Hydraulics
Blade Tip Angle - Front
46 deg
Blade Tip Angle - Rear
13 deg
Diameter
66.70 in / 1,694 mm
Max Lift Above Ground
17 in / 432 mm
Max Reach Outside Tires - Left
91 ft / 27.74 m
Max Reach Outside Tires - Right
90.50 ft / 27.58 m
Rotation
360 deg
Shift Left
30 in / 762 mm
Shift Right
29.50 in / 749 mm
Related Machines
Frequently Asked Questions
How does the Volvo Construction Equipment Volvo G780 compare to similar Motor Grader models? +
You can compare the Volvo Construction Equipment Volvo G780 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.