Overview
The Volvo Construction Equipment Volvo G780B is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 120.0 gal and hydraulic capacity of 35.4 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Volvo Construction Equipment Volvo G780B against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
43,250.30
lb
Max Power
243
hp
Moldboard Width
14
ft
Overall Length
30.59
ft
Full Specifications
52 specs
Dimensions
Blade Base
8.92 in / 227 mm
Height To Top Of Isomount Cab
10.50 ft / 3.20 m
Overall Length
30.59 ft / 9.32 m
Wheelbase
20.50 ft / 6.25 m
Width Over Tires
9.17 ft / 2.80 m
Engine
Alternator Supplied Amperage
80 A
Articulation Angle
22 deg
Blade Down Pressure
22,963 lb / 10,416 kg
Blade Pull At Max Weight
27,248 lb / 12,359 kg
Cooling System Fluid Capacity
8.20 gal / 31.0 L
Displacement
586 cu in / 9.6 L
Engine Make
2244
Engine Model
D10BGAE2
Fuel Capacity
120 gal / 454.2 L
Ground Clearance
2.30 ft / 0.70 m
Hydraulic System Fluid Capacity
35.40 gal / 134.0 L
Max Depth Of Cut
33 ft / 10.06 m
Max Power
243 hp / 181.2 kW
Max Speed - Forward
23.80 mph / 38.3 km/h
Max Speed - Reverse
17 mph / 27.4 km/h
Moldboard Height
31 in / 787 mm
Moldboard Thickness
1 in / 25 mm
Moldboard Width
14 ft / 4.27 m
Net Power Gears 7-8
243 hp / 181.2 kW
Net Torque Gears 7-8
846 lb-ft / 1,147 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Operating Voltage
24 V
Oscillation - Total
16 deg
Power Measured @
2,100 rpm
Pump Flow
75.10 gal/min / 284.3 L/min
Rear Diff/Final Drive Fluid Capacity
9 gal / 34.1 L
Relief Valve Pressure
2,700 psi / 186.2 bar
Side Shift Left
26.50 in / 673 mm
Side Shift Right
26.50 in / 673 mm
Std Operation Weight - Front Axle
12,842 lb / 5,825 kg
Std Operation Weight - Rear Axle
30,276 lb / 13,733 kg
Std Operation Weight - Total
43,250 lb / 19,618 kg
Tandem Case Fluid Capacity (Each)
27.80 gal / 105.2 L
Torque Measured @
1,100 rpm
Transmission Fluid Capacity
10.10 gal / 38.2 L
Wheel Lean
18 deg
Hydraulics
Blade Tip Angle - Front
46 deg
Blade Tip Angle - Rear
13 deg
Diameter
66.70 in / 1,694 mm
Max Lift Above Ground
17 in / 432 mm
Max Reach Outside Tires - Left
91 ft / 27.74 m
Max Reach Outside Tires - Right
90.50 ft / 27.58 m
Rotation
360 deg
Shift Left
30 in / 762 mm
Shift Right
29.50 in / 749 mm
Related Machines
Frequently Asked Questions
How does the Volvo Construction Equipment Volvo G780B compare to similar Motor Grader models? +
You can compare the Volvo Construction Equipment Volvo G780B side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.